Hi This system in include 2 part. part 1 is a ultrasonic radar system include one ultrasonic module and one servo motor. This system detects targets at a distance of less than 4 meters. part 2 is a rocket platform with 3 rocket. when radar...
This is my attempt at building a 4x4x4 LED cube using an Arduino Nano (V3.0). It takes a lot of patience to build it with endless/non-stop soldering and testing. But what a pleasure to see it working once done! Have used high brightness clear...
But first, let me keep doing well this library and continuing updating sending to me some coffee. If you understand that my work is worth $10 ..... Contact me if you need to create any libraries for: B4A, B4i or B4R Email...
Hi Guys.... It gives me great pleasure to be the first sharing my creation with B4R! This is one of those "everyone builds this" kind of thing, and there are literally thousands of examples using Arduino to builds this, as well of other...
Instructions to install and sample to use: But first, let me keep doing well this library and continuing updating sending to me some coffee. Step 1: Install the WIFIManager library through Sketch del Arduino: search for WifiManager by tzapu...
I've attached an FFT test program with source code for B4R. I am using B4R 2.51. My MCU is an 80MHz Wemos board. The FFT is fast. It uses a pre-computed coefficient lookup table. It performs a double precision complex FFT. The FFT code is in...
edited: connecting to www was added. B4J app for testing and setting ESP8266/32 using AT Commands. AT commands are used to test the module, set baud rate, check version, set RF power etc. The app also connects to a router. List of AT...
The electronic water descaler operates by wrapping coil of wire around the incoming water mains to pass a magnetic field through the water. The theory is that it causes the calcium in the water to stay in solution and so inhibit it from adhering...
Hi guys, time ago i built a Rover (4 wheel, Arduino powered) for my B4A android app: https://play.google.com/store/apps/details?id=com.rfo.IRaceradvanced the full tutorial for the Rover is here...
Porting B4R as such is possible too.. Another video on CGTN Africa for the previous post https://www.b4x.com/android/forum/threads/b4r-for-waziup-wastebin-management-system-africas-big-iot-platform.84462/
Hi everybody, Thanks to B4R I was able to develop a Data Logger and remote console for my main project, a food metal detector. This pjt show whatever is on MD main display and simulate it's four buttons remotelly. It stores on local SD some log...
Hi all of you. This project is a Clock that can set current time and wake up time. We can select mode with one push button.(clock setting mode or wake up setting mode) and can change in with two push button. one of that for hour and another for...
Hi all of you. in this project I can use 4 seven segment with 4 74HC595 multiplexer IC. my project wiring is shown below picture. in each time I show a number in left seven segment and then shift it to next seven segment in right side. I repeat...
This is the 2nd Drum project I created using B4R. Instead of UNO, I'm using ESP32 this time because of the build-in BLE support, I no longer need a MIDI shield or purchase an additional Bluetooth MIDI adaptor, all come with the ESP32, so that I...
My first B4R project using WeMos D1 mini (ESP8266), 8x8 LED matrix, buzzer and a touch switch. It's work together with my old B4J raspberry pi iClock project as a companion device. The raspberry pi clock located in my living room and this ESP8266...
My first attemp at creating an arduino project. I developed it for myself to be able to measure the water level in my rain recuperation tank. Basicly I know the dimensions of my underground tank (cube). By measuring the distance between the...
Something that worked for more than 40 years broke and I had to find a replacement. I want to show what I did. Background: Solar heating systems (for houses) can either be autonomous, where the water circulation is done by itself - hot water go...
My Complete Design Washing Machine with esp8266
Seven segments LED display, Arduino Uno or Nano egg timer. Seconds displayed, minutes are set by buttons. Also buttons for start and stop, pressing together MIN and MINx10 resets the display. Alarm at the end of count down switches on a 5VDC...
It has two part. One Application Software obviously using B4j & 2nd Hardware part based on Esp8266 12E. It is used in College and School while organizing various event in which several team are going to be participate. Each event has fixed time...