B4R Tutorial Charlieplexing - controlling N*(N-1) LED's with N GPIO pins

It is based on this posting. I am using an Arduino Nano to control the 12 LEDs using pins 8, 9, 10, and 11 of the Nano. Just thought it would be interesting to give Charlieplexing a go. Working very nicely...:)

circuit.png



20191122_191733.jpg


B4X: 
#Region Project Attributes
    #AutoFlushLogs: True
    #CheckArrayBounds: True
    #StackBufferSize: 300
#End Region

Sub Process_Globals
    'These global variables will be declared once when the application starts.
    'Public variables can be accessed from all modules.
    Public Serial1 As Serial
    
    Dim p8, p9, p10, p11 As Pin
    
    Dim t As Timer
    Dim cnt As Int
    
End Sub

Private Sub AppStart
    Serial1.Initialize(115200)
    Log("AppStart")
    
    cnt = 0
    
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    t.Initialize("t_tick", 50)
    
    t.Enabled = True
End Sub


Sub t_tick
    
    cnt = cnt + 1
    If cnt = 13 Then cnt = 1
    If cnt = 1 Then
        p8.Initialize(8, p8.MODE_OUTPUT)
        p9.Initialize(9, p9.MODE_OUTPUT)
        p10.Initialize(10, p10.MODE_INPUT)
        p11.Initialize(11, p11.MODE_INPUT)
        p8.DigitalWrite(True)
        p9.DigitalWrite(False)
    End If
    
    If cnt = 2 Then
        p8.Initialize(8, p8.MODE_OUTPUT)
        p9.Initialize(9, p9.MODE_OUTPUT)
        p10.Initialize(10, p10.MODE_INPUT)
        p11.Initialize(11, p11.MODE_INPUT)
        p8.DigitalWrite(False)
        p9.DigitalWrite(True)
    End If
    
    If cnt = 3 Then
        p8.Initialize(8, p8.MODE_INPUT)
        p9.Initialize(9, p9.MODE_OUTPUT)
        p10.Initialize(10, p10.MODE_OUTPUT)
        p11.Initialize(11, p11.MODE_INPUT)
        p9.DigitalWrite(True)
        p10.DigitalWrite(False)
    End If
    
    If cnt = 4 Then
        p8.Initialize(8, p8.MODE_INPUT)
        p9.Initialize(9, p9.MODE_OUTPUT)
        p10.Initialize(10, p10.MODE_OUTPUT)
        p11.Initialize(11, p11.MODE_INPUT)
        p9.DigitalWrite(False)
        p10.DigitalWrite(True)
    End If
    
    If cnt = 5 Then
        p8.Initialize(8, p8.MODE_INPUT)
        p9.Initialize(9, p9.MODE_INPUT)
        p10.Initialize(10, p10.MODE_OUTPUT)
        p11.Initialize(11, p11.MODE_OUTPUT)
        p10.DigitalWrite(True)
        p11.DigitalWrite(False)
    End If
    
    If cnt = 6 Then
        p8.Initialize(8, p8.MODE_INPUT)
        p9.Initialize(9, p9.MODE_INPUT)
        p10.Initialize(10, p10.MODE_OUTPUT)
        p11.Initialize(11, p11.MODE_OUTPUT)
        p10.DigitalWrite(False)
        p11.DigitalWrite(True)
    End If
    
    If cnt = 7 Then
        p8.Initialize(8, p8.MODE_OUTPUT)
        p9.Initialize(9, p9.MODE_INPUT)
        p10.Initialize(10, p10.MODE_OUTPUT)
        p11.Initialize(11, p11.MODE_INPUT)
        p8.DigitalWrite(True)
        p10.DigitalWrite(False)
    End If
    
    If cnt = 8 Then
        p8.Initialize(8, p8.MODE_OUTPUT)
        p9.Initialize(9, p9.MODE_INPUT)
        p10.Initialize(10, p10.MODE_OUTPUT)
        p11.Initialize(11, p11.MODE_INPUT)
        p8.DigitalWrite(False)
        p10.DigitalWrite(True)
    End If
    
    If cnt = 9 Then
        p8.Initialize(8, p8.MODE_INPUT)
        p9.Initialize(9, p9.MODE_OUTPUT)
        p10.Initialize(10, p10.MODE_INPUT)
        p11.Initialize(11, p11.MODE_OUTPUT)
        p9.DigitalWrite(True)
        p11.DigitalWrite(False)
    End If
    
    If cnt = 10 Then
        p8.Initialize(8, p8.MODE_INPUT)
        p9.Initialize(9, p9.MODE_OUTPUT)
        p10.Initialize(10, p10.MODE_INPUT)
        p11.Initialize(11, p11.MODE_OUTPUT)
        p9.DigitalWrite(False)
        p11.DigitalWrite(True)
    End If
    
    If cnt = 11 Then
        p8.Initialize(8, p8.MODE_OUTPUT)
        p9.Initialize(9, p9.MODE_INPUT)
        p10.Initialize(10, p10.MODE_INPUT)
        p11.Initialize(11, p11.MODE_OUTPUT)
        p8.DigitalWrite(True)
        p11.DigitalWrite(False)
    End If
    
    If cnt = 12 Then
        p8.Initialize(8, p8.MODE_OUTPUT)
        p9.Initialize(9, p9.MODE_INPUT)
        p10.Initialize(10, p10.MODE_INPUT)
        p11.Initialize(11, p11.MODE_OUTPUT)
        p8.DigitalWrite(False)
        p11.DigitalWrite(True)
    End If

End Sub
 

Attachments

  • b4rCharliePlexing.zip
    1.1 KB · Views: 365
Click to expand...
Johan Schoeman

Johan Schoeman

Expert
Licensed User
Longtime User
Based on this tutorial - controlling 20 LEDs with 5 GPIO pins on an Arduino (in this case using a Nano)....

CP20.jpg


A bit of a crow's nest with the wiring - but working perfectly...

20191123_150314.jpg



B4X: 
#Region Project Attributes
    #AutoFlushLogs: True
    #CheckArrayBounds: True
    #StackBufferSize: 300
#End Region

Sub Process_Globals
    'These global variables will be declared once when the application starts.
    'Public variables can be accessed from all modules.
    Public Serial1 As Serial
   
    Dim p7, p8, p9, p10, p11 As Pin
   
    Dim delaytime As ULong = 100
   
End Sub

Private Sub AppStart
    Serial1.Initialize(115200)
    Log("AppStart")
   
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
   
    Delay(1000)
   
    light_1(0)
   
End Sub


Sub light_1(tag As Byte)

    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(True)
    p8.DigitalWrite(False)
    CallSubPlus("light_3", delaytime, 0)
End Sub

Sub light_2(tag As Byte)
   
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(False)
    p8.DigitalWrite(True)
    CallSubPlus("light_1", delaytime, 0)
End Sub

Sub light_3(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p8.DigitalWrite(True)
    p9.DigitalWrite(False)
    CallSubPlus("light_5", delaytime, 0)
End Sub

Sub light_4(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p8.DigitalWrite(False)
    p9.DigitalWrite(True)
    CallSubPlus("light_2", delaytime, 0)
End Sub

Sub light_5(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p9.DigitalWrite(True)
    p10.DigitalWrite(False)
    CallSubPlus("light_7", delaytime, 0)
End Sub

Sub light_6(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p9.DigitalWrite(False)
    p10.DigitalWrite(True)
    CallSubPlus("light_4", delaytime, 0)
End Sub

Sub light_7(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p10.DigitalWrite(True)
    p11.DigitalWrite(False)
    CallSubPlus("light_9", delaytime, 0)
End Sub

Sub light_8(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p10.DigitalWrite(False)
    p11.DigitalWrite(True)
    CallSubPlus("light_6", delaytime, 0)
End Sub

Sub light_9(tag As Byte)

    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(True)
    p9.DigitalWrite(False)
    CallSubPlus("light_11", delaytime, 0)
End Sub

Sub light_10(tag As Byte)

    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(False)
    p9.DigitalWrite(True)
    CallSubPlus("light_8", delaytime, 0)
End Sub

Sub light_11(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p8.DigitalWrite(True)
    p10.DigitalWrite(False)
    CallSubPlus("light_13", delaytime, 0)
End Sub

Sub light_12(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p8.DigitalWrite(False)
    p10.DigitalWrite(True)
    CallSubPlus("light_10", delaytime, 0)
End Sub

Sub light_13(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p9.DigitalWrite(True)
    p11.DigitalWrite(False)
    CallSubPlus("light_15", delaytime, 0)
End Sub

Sub light_14(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p9.DigitalWrite(False)
    p11.DigitalWrite(True)
    CallSubPlus("light_12", delaytime, 0)
End Sub

Sub light_15(tag As Byte)

    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(True)
    p10.DigitalWrite(False)
    CallSubPlus("light_17", delaytime, 0)
End Sub

Sub light_16(tag As Byte)

    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(False)
    p10.DigitalWrite(True)
    CallSubPlus("light_14", delaytime, 0)
End Sub

Sub light_17(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p8.DigitalWrite(True)
    p11.DigitalWrite(False)
    CallSubPlus("light_19", delaytime, 0)
End Sub

Sub light_18(tag As Byte)

    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p8.DigitalWrite(False)
    p11.DigitalWrite(True)
    CallSubPlus("light_16", delaytime, 0)
End Sub

Sub light_19(tag As Byte)

    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p7.DigitalWrite(True)
    p11.DigitalWrite(False)
    CallSubPlus("light_20", delaytime, 0)
End Sub

Sub light_20(tag As Byte)

    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p7.DigitalWrite(False)
    p11.DigitalWrite(True)
    CallSubPlus("light_18", delaytime, 0)
End Sub


 

Attachments

  • b4rCharliePlexing20.zip
    1.3 KB · Views: 311
Johan Schoeman

Johan Schoeman

Expert
Licensed User
Longtime User
The example in post #2 works better with the below code as it switches all pin modes back to MODE_INPUT before setting the modes for the pins that need to be MODE_OUTPUT. It eliminates the unwanted flickering of some LED's that might maybe occur when they are supposed to be off.

B4X: 
#Region Project Attributes
    #AutoFlushLogs: True
    #CheckArrayBounds: True
    #StackBufferSize: 300
#End Region

Sub Process_Globals
    'These global variables will be declared once when the application starts.
    'Public variables can be accessed from all modules.
    Public Serial1 As Serial
    
    Dim p7, p8, p9, p10, p11 As Pin
    
    Dim delaytime As ULong = 50
    
End Sub

Private Sub AppStart
    Serial1.Initialize(115200)
    Log("AppStart")
    
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    
    Delay(1000)
    
    light_1(0)
    
End Sub


Sub light_1(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(True)
    p8.DigitalWrite(False)
    CallSubPlus("light_3", delaytime, 0)
End Sub

Sub light_2(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(False)
    p8.DigitalWrite(True)
    CallSubPlus("light_1", delaytime, 0)
End Sub

Sub light_3(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p8.DigitalWrite(True)
    p9.DigitalWrite(False)
    CallSubPlus("light_5", delaytime, 0)
End Sub

Sub light_4(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p8.DigitalWrite(False)
    p9.DigitalWrite(True)
    CallSubPlus("light_2", delaytime, 0)
End Sub

Sub light_5(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p9.DigitalWrite(True)
    p10.DigitalWrite(False)
    CallSubPlus("light_7", delaytime, 0)
End Sub

Sub light_6(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p9.DigitalWrite(False)
    p10.DigitalWrite(True)
    CallSubPlus("light_4", delaytime, 0)
End Sub

Sub light_7(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p10.DigitalWrite(True)
    p11.DigitalWrite(False)
    CallSubPlus("light_9", delaytime, 0)
End Sub

Sub light_8(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p10.DigitalWrite(False)
    p11.DigitalWrite(True)
    CallSubPlus("light_6", delaytime, 0)
End Sub

Sub light_9(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(True)
    p9.DigitalWrite(False)
    CallSubPlus("light_11", delaytime, 0)
End Sub

Sub light_10(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(False)
    p9.DigitalWrite(True)
    CallSubPlus("light_8", delaytime, 0)
End Sub

Sub light_11(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p8.DigitalWrite(True)
    p10.DigitalWrite(False)
    CallSubPlus("light_13", delaytime, 0)
End Sub

Sub light_12(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p8.DigitalWrite(False)
    p10.DigitalWrite(True)
    CallSubPlus("light_10", delaytime, 0)
End Sub

Sub light_13(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p9.DigitalWrite(True)
    p11.DigitalWrite(False)
    CallSubPlus("light_15", delaytime, 0)
End Sub

Sub light_14(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_OUTPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p9.DigitalWrite(False)
    p11.DigitalWrite(True)
    CallSubPlus("light_12", delaytime, 0)
End Sub

Sub light_15(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(True)
    p10.DigitalWrite(False)
    CallSubPlus("light_17", delaytime, 0)
End Sub

Sub light_16(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_OUTPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    p7.DigitalWrite(False)
    p10.DigitalWrite(True)
    CallSubPlus("light_14", delaytime, 0)
End Sub

Sub light_17(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p8.DigitalWrite(True)
    p11.DigitalWrite(False)
    CallSubPlus("light_19", delaytime, 0)
End Sub

Sub light_18(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_OUTPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p8.DigitalWrite(False)
    p11.DigitalWrite(True)
    CallSubPlus("light_16", delaytime, 0)
End Sub

Sub light_19(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p7.DigitalWrite(True)
    p11.DigitalWrite(False)
    CallSubPlus("light_20", delaytime, 0)
End Sub

Sub light_20(tag As Byte)
    
    turnOff
    p7.Initialize(7, p7.MODE_OUTPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_OUTPUT)
    p7.DigitalWrite(False)
    p11.DigitalWrite(True)
    CallSubPlus("light_18", delaytime, 0)
End Sub

Sub turnOff
    
    p7.Initialize(7, p7.MODE_INPUT)
    p8.Initialize(8, p8.MODE_INPUT)
    p9.Initialize(9, p9.MODE_INPUT)
    p10.Initialize(10, p10.MODE_INPUT)
    p11.Initialize(11, p11.MODE_INPUT)
    
End Sub
 

Attachments

  • b4rCharliePlexing20V2.zip
    1.3 KB · Views: 302
You must log in or register to reply here.

Similar Threads

Cableguy
  • Article
B4R Code Snippet ESP32_Dev_Module_Pins Code Module
Replies
0
Views
406
Cableguy
Cableguy
JMB
  • Question
B4R Question ESP8266 and WS2812B LED Strip
Replies
4
Views
2K
JMB
JMB
Robert Valentino
  • Question
B4R Question IR Led's that I have tried
Replies
5
Views
2K
miker2069
M
Erel
  • Article
B4R Library Adafruit RGB Led Matrix
Replies
3
Views
4K
Johan Hormaza
Johan Hormaza
Erel
  • Article
B4R Library RF24 - nRF24L01 radio modules
Replies
16
Views
11K
Erel
Erel
Top