UPDATED:
Version 1.20 now covers the Honeywell N6602, N6603 and also the N5703 1D/2D barcode scan engines.
Hello All,
Here is a library that I wrapped for Android 1D/2D barcode scanners that uses the Honeywell N6602, N6603, and also the N5703 hardware scan engines.
Obviously you don't need a library to use a Android 1D/2D hardware scan engines. To receive barcode data, you can use an Intent via a Receiver Module without the need for a library, but this can cause conflicts. For instance, the camera does not work while the scan engine is open (on/activated). This is because in Android the hardware barcode scan engine itself is classified as a camera and you can't run two cameras at the same time. I use the library to close (deactivate) the hardware barcode scan engine, then I can use the camera to take photos, for example taking a photo of an item of stock. Afterwards I use the library to open (activate) the hardware barcode scan engine again.
Take note: This library does not work with mobile phone built-in cameras, it only works with Android powered devices that uses the Honeywell scan engines that I've previously mentioned.
I personally only purchase and supply barcode scanners to my clients that use the Honeywell N6603 laser module, it's not their latest and greatest module, but it works exceptionally well. Android powered 1D/2D hardware barcode scanners cost more than a cheap smartphone, but their hardware, scan engines, build quality, rigidness, scanning distance and speed of scanning 1D/2D barcodes are clearly superior to using any smartphone camera.
B4A library tab
Important: There are 3 files in the attached zipped library file, place all 3 files in your B4A additional libraries folder.
I've changed some of the original java functions for continuity purposes in B4A.
SS_HoneywellN660xN5703
Author: Peter Simpson
Version: 1.2
Below are some examples of generic Android powered 1D/2D barcode scanners that this library could/might work with (five definitely work), plus much much more, No guarantees thought. When ordering these 1D/2D barcode scanners, you would need to look for scanners that have the option of using the Honeywell N6602, N6603 or N5703 scan engines. Using these particular scan engines can easy add £50-£90 (depending on the supplier) to the price of ordering a barcode scanner, but in my personal opinion it's 100% worth every penny.
This library is for use with Honeywell N6602, N6603 or N5703 1D/2D hardware scan modules.
I've tested this library on five different models of barcode scanners with different hardware scan modules, in my tests they all worked flawlessly.
Update: V1.1
D = 106+105, 116 + 108
Enjoy...
Version 1.20 now covers the Honeywell N6602, N6603 and also the N5703 1D/2D barcode scan engines.
Hello All,
Here is a library that I wrapped for Android 1D/2D barcode scanners that uses the Honeywell N6602, N6603, and also the N5703 hardware scan engines.
Obviously you don't need a library to use a Android 1D/2D hardware scan engines. To receive barcode data, you can use an Intent via a Receiver Module without the need for a library, but this can cause conflicts. For instance, the camera does not work while the scan engine is open (on/activated). This is because in Android the hardware barcode scan engine itself is classified as a camera and you can't run two cameras at the same time. I use the library to close (deactivate) the hardware barcode scan engine, then I can use the camera to take photos, for example taking a photo of an item of stock. Afterwards I use the library to open (activate) the hardware barcode scan engine again.
Take note: This library does not work with mobile phone built-in cameras, it only works with Android powered devices that uses the Honeywell scan engines that I've previously mentioned.
I personally only purchase and supply barcode scanners to my clients that use the Honeywell N6603 laser module, it's not their latest and greatest module, but it works exceptionally well. Android powered 1D/2D hardware barcode scanners cost more than a cheap smartphone, but their hardware, scan engines, build quality, rigidness, scanning distance and speed of scanning 1D/2D barcodes are clearly superior to using any smartphone camera.
B4A library tab
Important: There are 3 files in the attached zipped library file, place all 3 files in your B4A additional libraries folder.
Some scanner functions:
BScannner.SetScanBeep(True)
BScannner.SetScanVibrate(True)
BScannner.SetIndicatorLightMode(True)
Log($"Open the scanner: ${BScannner.OpenScanner}"$) 'Laser scanner is turned on and will scan
Log($"Is scanner open: ${BScannner.IsScanOpened}"$)
Log($"Get beep state: ${BScannner.GetScanBeepState}"$)
Log($"Get vibrate state: ${BScannner.GetScanVibrateState}"$)
Log($"Get indicator light state: ${BScannner.GetIndicatorLightMode}"$)
Log($"Get broadcast mode: ${BScannner.GetOutScanMode}"$)
Log($"Get scan mode: ${BScannner.GetScanLaserMode}"$)
Log($"Scanned barcode value: ${BScannner.GetScanCodeValue}"$)
Log($"Reset the scanner: ${BScannner.ResetScan}"$)
Resulting B4A logs:
** Activity (main) Create (first time) **
Success: Scanner module found
Scanner mode: Broadcast mode
Open the scanner: true
Is scanner open: true
Get beep state: true
Get vibrate state: true
Get indicator light state: true
Get broadcast mode: Broadcast mode
Get scan mode: Single mode
Scanned barcode value: null
Reset the scanner: true
Call B4XPages.GetManager.LogEvents = True to enable logging B4XPages events.I've changed some of the original java functions for continuity purposes in B4A.
SS_HoneywellN660xN5703
Author: Peter Simpson
Version: 1.2
- HoneywellN660xN5703
- Functions:
- CloseScanner As Boolean
Turn off the power for the scanner.
Return true if successful, false if failed. - GetIndicatorLightMode As Boolean
Get the blink indicator lamp mode.
Returns true for On or false for Off. - GetOutScanMode As String
Get the barcode output mode.
Return output mode. - GetScanBeepState As Boolean
Get the beep status.
Returns true for On or false for Off. - GetScanCodeValue As String
Get the scan data at broadcast mode.
Return only scan data, can use after scan complete.
I personally recommend using the B4A Receiver Module after scanning a barcode. - GetScanLaserMode As String
Get the laser continuous mode.
Returns continuous mode(4) or single mode(8) setting. - GetScanVibrateState As Boolean
Get the vibrate status.
Returns true for On or false for Off. - Initialize (EventName As String)
Initializes the object. - IsInitialized As Boolean
Tests whether the object was initialized. - IsScanOpened As Boolean
Get the scanner status.
Return true for open or false for closed. - OpenScanner As Boolean
Turn on the power for the scanner.
Return true if successful, false if failed. - ResetScan As Boolean
Reset the scanner.
Return true if reset successfully. - SetIndicatorLightMode (Mode As Boolean)
Blink the indicator lamp when the scan is successful.
Param mode True(On) indicator lamp, False(Off) no indicator lamp. - SetOutScanMode (Mode As Int) As Boolean
Set the barcode output mode.
Param mode value: 0 Broadcast mode, 1 Editbox Mode, 2 Keyboard Mode.
Return true if successful, false if failed. - SetScanBeep (Mode As Boolean) As Boolean
Beep when the scan is successful.
Set true for On or false for Off.
Returns true for setting successfully. - SetScanLaserMode (Mode As Boolean)
Set the laser continuous scan mode.
Param mode start continuous scan True(On), stop continuous scan False(Off). - SetScanVibrate (Mode As Boolean) As Boolean
Vibrate when the scan is successful.
Set true for On or false for Off.
Returns true for setting successfully. - StartScan As Boolean
Start decoding.
Return true if the trigger is already active. - StopScan As Boolean
Stop decoding.
Return true if stopped successfully.
- CloseScanner As Boolean
- Functions:
Below are some examples of generic Android powered 1D/2D barcode scanners that this library could/might work with (five definitely work), plus much much more, No guarantees thought. When ordering these 1D/2D barcode scanners, you would need to look for scanners that have the option of using the Honeywell N6602, N6603 or N5703 scan engines. Using these particular scan engines can easy add £50-£90 (depending on the supplier) to the price of ordering a barcode scanner, but in my personal opinion it's 100% worth every penny.
This library is for use with Honeywell N6602, N6603 or N5703 1D/2D hardware scan modules.
I've tested this library on five different models of barcode scanners with different hardware scan modules, in my tests they all worked flawlessly.
Update: V1.1
- Changed the library name (generic was too broad a name for a hardware)
- Tidied up the java library code
- Changed the library name (SS_HoneywellN660xN5703) to better suite it's purpose
- Updated to a newer .jar file
- Removed a function
D = 106+105, 116 + 108
Enjoy...
Last edited:
