B4R Question How to connect to LoraWan

[janderkan]

If I read the Radiohead docs here http://www.airspayce.com/mikem/arduino/RadioHead/index.html
there is a Manager called RHReliableDatagram http://www.airspayce.com/mikem/arduino/RadioHead/classRHReliableDatagram.html

Anybody know if this is what I need to connect to f.ex. https://www.thethingsnetwork.org/

 

[janderkan]

Now I found Andreas Spiess https://github.com/matthijskooijman/arduino-lmic
He state that I need LMIC library to connect to a LoraWan gateway.

 

[janderkan]

Now I found another solution with a board from Arduino: https://store.arduino.cc/mkr-wan-1300
There is another library: https://github.com/arduino-libraries/MKRWAN

I have an open invitation from Erel: https://www.b4x.com/android/forum/threads/lora-support.79787/#post-505239

Question is: Which library is easiest to wrap ?
https://store.arduino.cc/mkr-wan-1300 or https://github.com/matthijskooijman/arduino-lmic

 

[Erel]

I have an open invitation from Erel: https://www.b4x.com/android/forum/threads/lora-support.79787/#post-505239

A Lora library was created: https://www.b4x.com/android/forum/threads/rradiohead-rf95-dragino-lora-shield.86819/

Though I don't think that you can use it with this service.

 

[janderkan]

A Lora library was created: https://www.b4x.com/android/forum/threads/rradiohead-rf95-dragino-lora-shield.86819/

Though I don't think that you can use it with this service.

I am now sure that I cannot use Radiohead to connect to Lorawan.
I found 2 , MKRWan and LMIC
Will you help me decide, which library will be easiest to create?
Looks like LMIC contains the largest amount of code, and MKRWAN has the stack onboard and is controlled by AT commands.

 

[Erel]

Both don't look like simple libraries to wrap.