Low frequency oscilloscope for Android using Arduino Uno or Nano, frequencies up to 5KHz. The software for Android is in B4A. The Arduino connected to Android device via USB OTG cable. The sampling is done by the Arduino ADC in a speed of about...
this example of MQTT client on ESP8266 is built to make a gateway between a rfbridge sonoff with tasmota and mobiles with a MQTT client, to monitor 2 SOS buttons MQTT broker is cloudMQTT.com Global configuration - a start we have 2 SOS...
... someone interested in Midi expansion of old Bandonion? Use due for key request and esp for midi export.
Hi This project was initially just a student project but then I received a number of orders. This project is very small and practical
Purpose To measure & monitor the room Air Quality Particulate Matter 2.5µm concentration with reasonable accuracy. Prototype Solution The solution reads the Air Quality Particulate Matter 2.5µm (PM25) concentration from an IKEA Vindriktning...
i created a small tool to move automatically string from code to PROGMEM part and creating the inline part. this tool is a script running on pspad. - first you have to install this script in pspad (in directory pspad/Script/VBScript) and to...
C code is for setting timer2 and timer0 to generate 1 second time base divided from the 16MHz crystal, timer1 is the counter. The 7 segment display MAX7219 is driven by software SPI, bit banging the 16 bits command to the display driver. The...
Hi Guys.... It gives me great pleasure to be the first sharing my creation with B4R! This is one of those "everyone builds this" kind of thing, and there are literally thousands of examples using Arduino to builds this, as well of other...
This is my attempt at building a 4x4x4 LED cube using an Arduino Nano (V3.0). It takes a lot of patience to build it with endless/non-stop soldering and testing. But what a pleasure to see it working once done! Have used high brightness clear...
Hi all of you. in this project I can use 4 seven segment with 4 74HC595 multiplexer IC. my project wiring is shown below picture. in each time I show a number in left seven segment and then shift it to next seven segment in right side. I repeat...
Just for fun. Have built a "flat" 3x3x3 LED cube on a breadboard and driving it with a Nano. There are 3 layers each with 9 LED's: 1. Layer 0 = Blue 2. Layer 1 = Green 3. Layer 2 = Red All anodes on each layer connected to one another and go...
I just want to use a single digit 7-segment LED display. Requires 1x 7 segment LED display (common anode) - code 5161BS, 8x 220 ohms resistors and 9 wires. No additional library or C++ code. Only a B4R code module. Github...
Hey guys, how are you? Here + 1 project of mine using the 1.2 V soil sensor I don't know if the calculations are correct and it works for me Thank you for being part of this community Sub Process_Globals Public Serial1 As Serial Private...