The idea is to use the DTR line of the serial port to actuate the camera. DTR is high (about +6V) whenever the serial port is open for communication, and low (-6V) at all other times.
On RS232 Serial connect Pin 7 Ground, Pin 5 RTS
Connector : One end to bulb input on Camera, to RS 232 port, RS232 adaptor to USB to hook to windows mobile devise.
I was using the Output fuction in an attempt to open port for shutter release.
It has nothing to do with the flash on the camera.
Only thing I'm after is control of shutter.
Any help would be great.
Thank you from the noob :sign0104: