besoft Active Member Licensed User Longtime User Jun 24, 2018 #1 Related to: https://www.b4x.com/android/forum/threads/rpi3-and-std-bad_alloc.65974/ I have the same problems. As the problem looks like, it causes / dev / ttyAMA0: How to solve the problem? The application works until the serial port is closed. I would ask the user "micro" if he can say more about how he solved the problem. I've tried several suggestions from the Internet, but none has been successful. I do not use the ttyAMA0 port itself because I have a USB / RS232 adapter connected to USB, so I only use ttyUSB0 in the application. Thank you
Related to: https://www.b4x.com/android/forum/threads/rpi3-and-std-bad_alloc.65974/ I have the same problems. As the problem looks like, it causes / dev / ttyAMA0: How to solve the problem? The application works until the serial port is closed. I would ask the user "micro" if he can say more about how he solved the problem. I've tried several suggestions from the Internet, but none has been successful. I do not use the ttyAMA0 port itself because I have a USB / RS232 adapter connected to USB, so I only use ttyUSB0 in the application. Thank you
besoft Active Member Licensed User Longtime User Jun 25, 2018 #2 After some research I realized that the problem is caused by the USB to UART bridge. Something is probably wrong with the driver. When I have more time, I will try to find out more. Upvote 0
After some research I realized that the problem is caused by the USB to UART bridge. Something is probably wrong with the driver. When I have more time, I will try to find out more.
