B4R Question SRC.INO.BIN upload to ESP without Code

[petr4ppc]

Dear friends,

please, I have src.ino.bin file, I have not code, it is possible to upload this file to ESP with b4r? Or what is the best solution?

Thank you
p4ppc

 

[janderkan]

You have asked the same question here, you can find the answer in the same link.

 

[petr4ppc]

Janderkan,

this is different situation - now I have
- B4R
and I have
- file

and this file I want to upload to ESP (without code)

Thank you
p4ppc

 

[thetahsk]

Don't complicate the situation. Use the link from above. Read a little bit and use Deepl as your personal translator.

...and where is your sourcecode ??

AND DON'T TRY TO FLASH ESP8266 BIN FILES TO ESP32.
THESE BIN FILES ARE NOT COMPATIBLE.

 

[petr4ppc]

Dear Thetahsk,

I want not to do complication. Excuse me if it looks like complication. I have not informations about possibilities how to upload bin file to esp - this is the reason why I am asking for the best way with using b4r.
Thank you for your translation tip I will try both (link and translator)

Best regards
p4ppc

 

[thetahsk]

...

Everything is fine.
You cannot upload bin file within B4R or directly in the Arduino IDE, but we have external tools which can do that.
The Python esptool.py is able to read and write binary files to the ESp's.

 

[OGmac]

Dear friends,

please, I have src.ino.bin file, I have not code, it is possible to upload this file to ESP with b4r? Or what is the best solution?

Thank you
p4ppc

ESP Updater B4J

ESP Updater This program is for uploading the prepared and compiled files on ESP8266 series modules and matching boards such as NodeMCU, Wemos, etc. Some features: Support bin file Detect the serial port of the device Support for Auto Programmer for NodeMcu and similar boards Burn the...

www.b4x.com

 

[petr4ppc]

Thank you very much OGmac and the TheTahsk for yours tips and advices,