Im using this:
(without pt2262 or any other chips) and
* 2
recv by code:
send with:
but can not recv the data from the recver wemos device. should buy another pt2262 for decode ? thank you very much!
recv by code:
B4X:
/*
Simple example for receiving
https://github.com/sui77/rc-switch/
*/
#include <RCSwitch.h>
RCSwitch mySwitch = RCSwitch();
void setup() {
Serial.begin(9600);
Serial.println("begin listen ");
mySwitch.enableReceive(1); // Receiver on interrupt 0 => that is pin #2
}
void loop() {
if (mySwitch.available()) {
int value = mySwitch.getReceivedValue();
if (value == 0) {
Serial.print("Unknown encoding");
} else {
Serial.print("Received ");
Serial.print( mySwitch.getReceivedValue() );
Serial.print(" / ");
Serial.print( mySwitch.getReceivedBitlength() );
Serial.print("bit ");
Serial.print("Protocol: ");
Serial.println( mySwitch.getReceivedProtocol() );
}
mySwitch.resetAvailable();
}
}
B4X:
/*
Example for different sending methods
https://github.com/sui77/rc-switch/
*/
#include <RCSwitch.h>
RCSwitch mySwitch = RCSwitch();
void setup() {
Serial.begin(9600);
// Transmitter is connected to Arduino Pin #10
mySwitch.enableTransmit(10);
// Optional set pulse length.
// mySwitch.setPulseLength(320);
// Optional set protocol (default is 1, will work for most outlets)
// mySwitch.setProtocol(2);
// Optional set number of transmission repetitions.
// mySwitch.setRepeatTransmit(15);
Serial.println("bengin");
}
void loop() {
/* See Example: TypeA_WithDIPSwitches */
// mySwitch.switchOn("11111", "00010");
// delay(1000);
// mySwitch.switchOff("11111", "00010");
// delay(1000);
/* Same switch as above, but using decimal code */
mySwitch.send(5393, 24);
delay(1000);
mySwitch.send(5396, 24);
delay(1000);
Serial.println("send once");
//
// /* Same switch as above, but using binary code */
// mySwitch.send("000000000001010100010001");
// delay(1000);
// mySwitch.send("000000000001010100010100");
// delay(1000);
//
// /* Same switch as above, but tri-state code */
// mySwitch.sendTriState("00000FFF0F0F");
// delay(1000);
// mySwitch.sendTriState("00000FFF0FF0");
// delay(1000);
//
// delay(20000);
}
