B4R Question Hints for a simple project

udg

Expert
Licensed User
Longtime User
Hi all.
Good at programming but no experience about electronics.
I have a simple project in mind, so I'd like to collect some hints from you.

Three elements: a panic button, an ESPN2 or similar and a wifi-based thermal printer.

Each time the button is pressed, the ESP32 should generate a qr code based on real-time data and other data from a config file. Then send the qr code to the printer.

A few constraints: all the components should be high grade, ready for 1000 tickets each day, operating 16 hours a day. Another constraint is that the pieces should fit in a plug and play configuration because I live 700km away from the shop.

I saw a few tutorials using breadboards, flying cables, powered by PC... but I need to start with something more industrial-grade.

What are you suggestions? Any recommended stuff to use?

Tia
 
Hi udg,

You can print QR codes with an ESP32 (NodeMCU or DevKit) and a thermal printer (even a cheap one like the MPT-II) that uses the Bluetooth Classic protocol (SPP - Serial Port Profile) and Richard Moore's QR Code library... however, there are Bluetooth printers already set up to print QR codes that you can manage via Bluetooth via an ESP32 such as the Epson TM-T20 or TM-m30 printer and also from other brands such as Citizen, Star Micronics, Niimbot and others...
​
 
Last edited:
Upvote 0
Back
Top