Audio 1.30 - Beeper causes sound loss/crash and or device reboot

[qle]

Hi,
I seem to be having issues with Beeper.beep causing the device to reboot.

I have recreated this on
1) Samsung Galaxy S (i9000 - 2.3.3) - reboots
2) Samsung Note 2 (N7105 - 4.1.1) - sound crashes
3) Barcode Scanner PDA (running 2.3.7) - reboots

If i call beep several times, the sound stops working, and if i then try to adjust the volume with the side volume buttons, it stops responding and reboots.

I use the beeper for the Barcode Scanner to indicate good or bad scan, and i do not wish to use sound files due to latency issues (and other reasons)
(it happens after 30 to 60 times, like simulating scanning barcodes in a store!)

I have attached my test project if interested to see if it happens on your device.

(just keep tapping the test button, and if you loose sound, try adjusting the device volume buttons)

Any help or workaround will be very appreciated.

Best Regards
Lee

 

[Erel]

Download the updated version: http://www.b4x.com/forum/additional...s/27022-audio-library-v1-31-a.html#post156453

Call Release when the Beeper is no longer needed (in this case after every beep).

 

[qle]

Erel you are fantastic!

i did look for the audio update... unfortunately i only found the 1.30 using the IDE 'help' menu.

(Basic4android (Basic for Android) - Android programming with Gui designer - dont use)

use: http://www.b4x.com/forum/additional...s/27022-audio-library-v1-31-a.html#post156453

The Audio 1.31 lib has resolved my issue.

If ever in Perth (Australia) pop in for a bbq! (serious!)

Thank you! :sign0060::sign0060::sign0060::sign0060:
Lee.