iOS Question Build B4i-Bridge app failing

[IamTrying]

- I am trying to [compile/build/run] my B4i app in iPhone 7 (iOS 11.0.2) device for [test/debug/release].
- Therefore i was writing my steps to recompile on another OSX machine
- But somehow i am not able to move forward because its failing (On my Step 0.2: https://gist.github.com/anonymous/a3dace1b6b1ad72db0e77cc9655873da )

 

[OliverA]

See section 1.3 of Beginner's Guide (https://www.b4x.com/android/forum/threads/b4i-beginners-guide.47720/).

 

[Erel]

You must start with these two tutorials:
Creating a certificate and provisioning profile
Installing B4i-Bridge and debugging first app

 

[IamTrying]

I made certificate and then uploaded the CSR. But when i Build B4i-Bridge app i get following:

B4i Version: 4.30
Parsing code.    (0.00s)
Compiling code.    (0.05s)
Building designer app.    (0.02s)
Building Xcode project    (0.10s)
Sending data to remote compiler.    Error
Out: Build settings from command line:
    ARCHS = armv7 arm64
    CODE_SIGN_IDENTITY = iPhone
    CONFIGURATION_BUILD_DIR = /Users/administrator/Documents/UploadedProjects/<user id>/Payload
    OTHER_CODE_SIGN_FLAGS = --keychain <user id>
    PRODUCT_NAME = B4i-Bridge
    PROVISIONING_PROFILE = 447c7941-a5f4-4d2b-87f9-xxx

=== BUILD TARGET B4iProject OF PROJECT B4iProject WITH CONFIGURATION Release ===

Check dependencies
Provisioning profile "b4idevelopment" doesn't include signing certificate "iPhone Developer: Sxxxxxxxxxxxx".
Code signing is required for product type 'Application' in SDK 'iOS 10.1'


Error: ** BUILD FAILED **


The following build commands failed:
    Check dependencies
(1 failure)

From browser when i open B4I-Bridge page i get following in safari:

 

[Erel]

Based on the error message the provision profile doesn't match the certificate.

Note that you don't need a development certificate. Only a production certificate with an ad hoc provision profile.

I recommend you to start with the hosted builder. Once you get it working switch to the local builder. I can send you a temporary id if you don't have one.

 

[IamTrying]

@Erel: Very confusing i must be missing something.

in my apple developer console.
- i have old certificates and old provision profiles (with team) and also old published app using objective-C in past.
- how can i use them (Existing certificates) instead of making absolutely new once?

FYI. i am trying to use Hosted builder. Hosted builder is running http://192.168.1.17:51041/, as you posted above screenshot

 

[Erel]

Create new ones as explained in the tutorial. You can always delete the certificates and start from scratch.

You are using a local Mac. Hosted builders = Mac builders hosted by Anywhere Software.

 

[IamTrying]

OK

- I did exactly like tutorial but still failing
- i was confused local and hosted. so i have license for the local. How can i get testing "Hosted builders" to see how the whole process works. After that
i will move to local builders.

 

[Erel]

I've sent you an email with instructions. You should post the error message if it still fails.

 

[IamTrying]

- I have received the CODE twice today (via email) and the time when i purchased my license (via email).
- Now i used that CODE (Hosted) as below:

And retried the same way.
But still its failing with same error: when i go to > Tools > Build Server > Build B4i-Bridge App

B4i Version: 4.30
Parsing code. (0.00s)
Compiling code. (0.05s)
Building designer app. (0.02s)
Building Xcode project (0.10s)
Sending data to remote compiler. Error
Out: Build settings from command line:
 ARCHS = armv7 arm64
 CODE_SIGN_IDENTITY = iPhone
 CONFIGURATION_BUILD_DIR = /Users/administrator/Documents/UploadedProjects/<user id>/Payload
 OTHER_CODE_SIGN_FLAGS = --keychain <user id>
 PRODUCT_NAME = B4i-Bridge
 PROVISIONING_PROFILE = 447c7941-a5f4-4d2b-87f9-xxx

=== BUILD TARGET B4iProject OF PROJECT B4iProject WITH CONFIGURATION Release ===

Check dependencies
Provisioning profile "b4idevelopment" doesn't include signing certificate "iPhone Developer: Sxxxxxxxxxxxx".Code signing is required for product type'Application' in SDK 'iOS 10.1'

Error: ** BUILD FAILED **


The following build commands failed:
 Check dependencies
(1 failure)

 

[IamTrying]

It worked.

- I removed my certificates, provision profile, wildcards
- i removed all the keys from C:\...B4I
- And then recreated them all after that i can see as following:

- After run all went fine.