Android Question cannot read and write to NFC card

Cnrez · Sep 27, 2017

hi all,
i want to read and write to mifare desfire 4k card
it support tech :
Techs: [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]

i want to use android.nfc.tech.NdefFormatable
i modified the sample project, but it didn't work,

there is nothing happened.
no errors, Reading completed. Success=false, Flag=0, Writing completed. Success=false, Flag=0

here is the log :

Code:

Logger connected to:  CipherLab CipherLab RS30
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
*** Service (starter) Create ***
** Service (starter) Start **
** Activity (main) Create, isFirst = true **
** Activity (main) Resume **
** Activity (main) Pause, UserClosed = false **
** Activity (main) Resume **
Techs: [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]
Connected: true
Reading completed. Success=false, Flag=0
** Activity (main) Pause, UserClosed = false **
** Activity (main) Resume **
Techs: [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]
Connected: true
Reading completed. Success=false, Flag=0

please help.
regards

here is my project

Erel · Sep 27, 2017

Try to write something on the tag first. You can use an NFC app to write it and make sure that it was written successfully.

Cnrez · Sep 27, 2017

Ok, i have tried using NXP TagWritter App
when i do 'Erase and Format as NDEF' , result is success
and when to write tags, also success.
but with my code , cannot read and write.

note : this card is not support NDEF tech, but IsoDep, NfcA and NdefFormatable

is my code above (attached in first post) is correct ?, and can be use for NdefFormatable tech ?
is tech beside NDEF can be used for read and write tags ? if can , i need an script examples.. please

attached is screenshot with NXP TagWritter and NXP Reader

regards

Erel · Sep 28, 2017

Which techs are listed after you write the data with this app?

Code:

Log($"Techs: ${techs}"$)

Cnrez · Sep 28, 2017

Erel said:
Which techs are listed after you write the data with this app?

Code:

Log($"Techs: ${techs}"$)

the same,

Code:

Techs: [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]

Cnrez · Sep 28, 2017

i'm confused ?
is techs used are card dependence, android version dependence or device dependence ?

in this thread looks like android version ?
https://www.b4x.com/android/forum/threads/nfc-2-01-android-7-0.77446/#post-490562
but when i tries different card, techs used can be different (using the same device)

my device Chiperlab RS30 use android 4.4.2

regards

Erel · Sep 28, 2017

Call WriteNdef after the connection:

Code:

Private Sub WriteNdef (Records() As Object)
   Dim RecordsJO As JavaObject
   RecordsJO.InitializeArray("android.nfc.NdefRecord", Array(nfc.CreateUriRecord("https://www.b4x.com")))
   Dim message As JavaObject
   message.InitializeNewInstance("android.nfc.NdefMessage", Array(RecordsJO))
   TagTech.RunAsync("Format", "format", Array(message), 0)
   Wait For Format_RunAsync (Flag As Int, Success As Boolean, Result As Object)
   Log("format: " & Success)
   Log(Result)
End Sub

What is the output?

Cnrez · Sep 28, 2017

ok, here is my code :

Code:

Sub Activity_Resume
    'forces all nfc intents to be sent to this activity
    nfc.EnableForegroundDispatch
    Dim si As Intent = Activity.GetStartingIntent
    'check that the intent is a new intent
    If si.IsInitialized = False Or si = prevIntent Then Return
    prevIntent = si
   
    If si.Action.EndsWith("TECH_DISCOVERED") Or si.Action.EndsWith("NDEF_DISCOVERED") Or si.Action.EndsWith("TAG_DISCOVERED") Then
        Dim techs As List = nfc.GetTechList(si)
        Log($"Techs: ${techs}"$)
        'in this case we are only accessing Ndef tags.
        If techs.IndexOf("android.nfc.tech.NdefFormatable") > -1 Then
            ''TagTech.Initialize("TagTech", "android.nfc.tech.NfcA" , si)
            'Connect to the tag
            ''TagTech.Connect
           
            TagTech.Initialize("TagTech", "android.nfc.tech.NdefFormatable" , si)
            TagTech.Connect
            WriteNdef(Array(nfc.CreateMimeRecord("text/plain", flTxt1.Text.GetBytes("UTF8")), _
                      nfc.CreateMimeRecord("text/plain", flTxt2.Text.GetBytes("UTF8"))))       
                   
        Else
            ToastMessageShow("Tag does not support Ndef.", True)
        End If
    End If
End Sub


Private Sub WriteNdef (Records() As Object)
    Dim RecordsJO As JavaObject
    RecordsJO.InitializeArray("android.nfc.NdefRecord", Array(nfc.CreateUriRecord("https://www.b4x.com")))
    Dim message As JavaObject
    message.InitializeNewInstance("android.nfc.NdefMessage", Array(RecordsJO))
    TagTech.RunAsync("Format", "format", Array(message), 0)
    Wait For Format_RunAsync (Flag As Int, Success As Boolean, Result As Object)
    Log("format: " & Success)
    Log(Result)
End Sub

and here is the result (log)

Code:

Logger connected to:  CipherLab CipherLab RS30
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
*** Service (starter) Create ***
** Service (starter) Start **
** Activity (main) Create, isFirst = true **
** Activity (main) Resume **
** Activity (main) Pause, UserClosed = false **
** Activity (main) Resume **
Techs: [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]
format: false
null

Erel · Sep 28, 2017

Not good. You must wait for it to be connected. Call WriteNdef from TagTech_Connected.

Cnrez · Sep 28, 2017

ok, like this

Code:

Sub Activity_Resume
    'forces all nfc intents to be sent to this activity
    nfc.EnableForegroundDispatch
    Dim si As Intent = Activity.GetStartingIntent
    'check that the intent is a new intent
    If si.IsInitialized = False Or si = prevIntent Then Return
    prevIntent = si
   
    If si.Action.EndsWith("TECH_DISCOVERED") Or si.Action.EndsWith("NDEF_DISCOVERED") Or si.Action.EndsWith("TAG_DISCOVERED") Then
        Dim techs As List = nfc.GetTechList(si)
        Log($"Techs: ${techs}"$)
        'in this case we are only accessing Ndef tags.
        If techs.IndexOf("android.nfc.tech.NdefFormatable") > -1 Then
            ''TagTech.Initialize("TagTech", "android.nfc.tech.NfcA" , si)
            'Connect to the tag
            ''TagTech.Connect
           
            TagTech.Initialize("TagTech", "android.nfc.tech.NdefFormatable" , si)
            TagTech.Connect
                   
        Else
            ToastMessageShow("Tag does not support Ndef.", True)
        End If
    End If
End Sub


Private Sub WriteNdef (Records() As Object)
    Dim RecordsJO As JavaObject
    RecordsJO.InitializeArray("android.nfc.NdefRecord", Array(nfc.CreateUriRecord("https://www.b4x.com")))
    Dim message As JavaObject
    message.InitializeNewInstance("android.nfc.NdefMessage", Array(RecordsJO))
    TagTech.RunAsync("Format", "format", Array(message), 0)
    Wait For Format_RunAsync (Flag As Int, Success As Boolean, Result As Object)
    Log("format: " & Success)
    Log(Result)
End Sub

Private Sub TagTech_Connected (Success As Boolean)
    Log($"Connected: ${Success}"$)
    WriteNdef(Array(nfc.CreateMimeRecord("text/plain", flTxt1.Text.GetBytes("UTF8")), _
                      nfc.CreateMimeRecord("text/plain", flTxt2.Text.GetBytes("UTF8"))))       
           
End Sub

the result :

Code:

Logger connected to:  CipherLab CipherLab RS30
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
** Activity (main) Pause, UserClosed = false **
** Activity (main) Resume **
Techs: [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]
Connected: true
format: false
null

Cnrez · Sep 28, 2017

Code:

Private Sub TagTech_Connected (Success As Boolean)
    Log($"Connected: ${Success}"$)
    If Success = False Then
        ToastMessageShow("Error connecting to tag", True)
        Log(LastException)
    Else
        WriteNdef(Array(nfc.CreateMimeRecord("text/plain", flTxt1.Text.GetBytes("UTF8")), _
                      nfc.CreateMimeRecord("text/plain", flTxt2.Text.GetBytes("UTF8"))))
    End If
           
End Sub

same result

Code:

** Activity (main) Pause, UserClosed = false **
** Activity (main) Resume **
Techs: [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]
Connected: true
format: false
null

Erel · Sep 28, 2017

- Add Log(LastException) at the end of WriteNdef.
- Check the unfiltered logs.

Cnrez · Sep 28, 2017

ok

Code:

** Activity (main) Pause, UserClosed = false **
ACT-NEW_INTENT handled : 0 / NewIntentData{intents=[Intent { act=android.nfc.action.TAG_DISCOVERED flg=0x10020000 cmp=b4a.example/.main (has extras) }] token=android.os.BinderProxy@41f7c288}
** Activity (main) Resume **
Techs: [android.nfc.tech.IsoDep, android.nfc.tech.NfcA, android.nfc.tech.NdefFormatable]
Connected: true
(IOException) java.io.IOException
java.lang.reflect.InvocationTargetException
    at java.lang.reflect.Method.invokeNative(Native Method)
    at java.lang.reflect.Method.invoke(Method.java:515)
    at anywheresoftware.b4j.object.JavaObject.RunMethod(JavaObject.java:131)
    at anywheresoftware.b4a.objects.NFC$TagTechnologyWrapper$2.call(NFC.java:298)
    at anywheresoftware.b4a.objects.NFC$TagTechnologyWrapper$2.call(NFC.java:1)
    at anywheresoftware.b4a.BA$3.run(BA.java:451)
    at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:422)
    at java.util.concurrent.FutureTask.run(FutureTask.java:237)
    at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1112)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:587)
    at java.lang.Thread.run(Thread.java:841)
Caused by: java.io.IOException
    at android.nfc.tech.NdefFormatable.format(NdefFormatable.java:141)
    at android.nfc.tech.NdefFormatable.format(NdefFormatable.java:95)
    ... 11 more
format: false
null

what should i do ?

Erel · Sep 28, 2017

This error means that your Android device cannot format this tag. You will only be able to write with lower level commands.

Check this answer: https://stackoverflow.com/a/36135813/971547

Cnrez · Sep 28, 2017

i see, so my device (chiperlab RS30) is not supported for this operation,
thanks Erel, i will try on another device

note : can i do low level command with B4A ?

regards

Erel · Sep 28, 2017

It shouldn't be too difficult to implement the code from that link with TagTech.RunAsync.

Something like:

Code:

'after connection
TagTech.RunAsync("TT", "transceive", Array(Array As Byte(0xA2, 0x03, 0xE1, 0x10, 0x06, 0)), 0)
Wait For TT_RunAsync (Flag As Int, Success As Boolean, Result As Object)
Log(Success)
TagTech.RunAsync("TT", "transceive", Array(Array As Byte(0xA2, 0x04, 0x03, 0x00, 0xFE, 0)), 0)
Wait For TT_RunAsync (Flag As Int, Success As Boolean, Result As Object)
Log(Success)
TagTech.Close

I'm not familiar with this structure. Just copied it from the answer.

Note that you need to use android.nfc.tech.NfcA instead of android.nfc.tech.NdefFormatable.

Cnrez · Sep 28, 2017

thank you Erel
i will try that

Regards

bentsvendsen · Oct 1, 2017

Cnrez said:
thank you Erel
i will try that

Regards

The following is from the android documentation:

The primary ISO-DEP I/O operation is transceive(byte[]). Applications must implement their own protocol stack on top of transceive(byte[]).

That means you have to build your own protocol using the transceive method. Consult the documentation for the Mifare chip

Android Question cannot read and write to NFC card

Cnrez

Member

Attachments

Erel

B4X founder

Cnrez

Member

Attachments

Erel

B4X founder

Cnrez

Member

Cnrez

Member

Erel

B4X founder

Cnrez

Member

Erel

B4X founder

Cnrez

Member

Cnrez

Member

Erel

B4X founder

Cnrez

Member

Erel

B4X founder

Cnrez

Member

Erel

B4X founder

Cnrez

Member

bentsvendsen

New Member

Similar Threads