Android Question DateTime Dialog Arithmetic

[RichardN]

I am struggling with the time values that come out of the TimeDialog. It seems I can determine the interval between two absolute values, I can also add those intervals to another absolute value and get the correct result. My problem is that I am unable to display an interval (HH:mm) derived from two other values. The last line of the code does not give the correct value. I tried looking at the DateUtils but I don't see anything that helps.

Can anyone provide a correct solution please?

[CODE lang="b4x" title="DateTime Arithmetic"]Sub Activity_Create(FirstTime As Boolean)

DateTime.TimeFormat = "HH:mm"
Dim td As TimeDialog
td.Is24Hours = True

Dim StartTime,FinishTime, TotalTime, EachPeriod As Long

td.Show("Enter Start Time","Start Time","OK","Cancel","",Null)
Dim StartTime As Long = td.TimeTicks


td.Show("Enter Finish Time","Start Time","OK","Cancel","",Null)
FinishTime = td.TimeTicks

TotalTime = FinishTime - StartTime
EachPeriod = TotalTime / 3

Dim FirstPeriodStarts, SecondPeriodStarts, ThirdPeriodStarts As Long

FirstPeriodStarts = StartTime
SecondPeriodStarts = FirstPeriodStarts + EachPeriod
ThirdPeriodStarts = SecondPeriodStarts + EachPeriod

Log(DateTime.Time(StartTime)) 'These values all correct
Log(DateTime.Time(SecondPeriodStarts))
Log(DateTime.Time(ThirdPeriodStarts))
Log(DateTime.Time(FinishTime))

Log(DateTime.Time(TotalTime)) 'Does not work!

End Sub[/CODE]

 

[agraham]

TotalTime is a duration and not a point in time so DateTime.Time is not a valid use of a duration.

 

[emexes]

display an interval (HH:mm) derived from two other values

TotalTime and EachPeriodTime intervals are in milliseconds, so if you divide them by 60000 (1 minute = 60 seconds x 1000 ms) it will give you the time intervals in minutes and if you divide them by 3600000 (1 hour = 60 minutes x 60 seconds x 1000 ms) it will give you the time intervals in hours (eg 1.1 = 1 hour 6 minutes).

The easiest way to format them as HH:MM is probably to add midnight of an arbitrary (but non-daylight-savings-shift) date to the time interval, and use just the time portion of the formatted result.

Or you could do it "manually" eg something like:

Dim MM As Int = TotalTime / 60000    'I am pretty certain that integer division rounds down
Dim HH As Int = MM / 60
MM = MM - HH * 60

Dim HHMM as String = NumberFormat(HH, 2, 0) & ":" & NumberFormat(MM, 2, 0)

 

[RichardN]

I went for a different solution. In my application using DateUtils.PeriodBetween(TimeStart,TimeEnd) and then formatting the result proved easier (see below)

Unfortunately when trying to input two times (in my case always within 24 hours of each other) the Time Dialog outputs an absolute figure. So if you want to determine the time difference between 00:00 and 08:30 it is fairly easy. It gets more complicated when you ask for 23:30 to 09:00 because the start-to-finish calculation gives a negative result (remember both dialog outputs are TODAY). The logic of figuring this out to work in all circumstances will drive you round the bend!

[CODE lang="b4x" title="Calculating a time interval period"]Sub TimeDifference(TimeStart As Long, TimeEnd As Long) As String

If TimeEnd < TimeStart Then TimeEnd = TimeEnd + DateTime.TicksPerDay 'Correct end-time to the next day if less

Dim pd As Period
pd = DateUtils.PeriodBetween(TimeStart,TimeEnd)

Dim hrs As Int = pd.Hours
Dim mins As Int = pd.Minutes

Return NumberFormat2(hrs,2,0,0,False) & ":" & NumberFormat2(mins,2,0,0,False)

End Sub[/CODE]

 

[RichardN]

As in the subroutine above:

If TimeEnd < TimeStart Then TimeEnd = TimeEnd + DateTime.TicksPerDay     'Correct end-time to the next day if less

 

[Mahares]

If TimeEnd < TimeStart Then TimeEnd = TimeEnd + DateTime.TicksPerDay 'Correct end-time to the next day if less

If you use the DateUtils.PeriodBetween approach, you have to also include the date component in the calculation as the parameters have to reflect an instance of date/time.
In your calculations, you are adding a day's ticks when the time difference is negative to come up with a positive time differential, but what happens when you are dealing with daylight savings time, your calculations will be off by 1 hour, if say, you use: 23:30 and 9:00. Your calculations are ok when the start time is less than the end time.

 

[Mahares]

subroutine above:

Here is what I think a sub in line with what you are doing that would work even with DST. If it does not fit in your scheme and scenario, just toss it:

Log(TimeDifference("23:30", "9:00"))
Log(TimeDifference("11:30", "13:00"))


Sub TimeDifference(TimeSart As String, TimeEnd As String) As String
    DateTime.TimeFormat = "HH:mm"
    Dim t1 As Long = TimeSart.SubString2(0, TimeSart.IndexOf(":"))*DateTime.TicksPerHour
    Dim t2 As Long = TimeEnd.SubString( TimeEnd.IndexOf(":")+1)*DateTime.TicksPerMinute
    
    If t2 < t1 Then 'Correct end-time to the next day if less
        DateTime.DateFormat = "yyyy-MM-dd"   'or whatever format you normally use 
        Dim d2 As String = DateTime.date(DateTime.Now)   'today
        Dim d1 As String = DateTime.Date(DateTime.Add(DateTime.Now ,0,0,-1))      'yesterday
        
        DateTime.DateFormat = "yyyy-MM-dd HH:mm"
        t1=DateTime.DateParse(d1 & " " & TimeSart)
        t2=DateTime.DateParse(d2 & " " & TimeEnd)        
    End If
    
    Dim pd As Period
    pd = DateUtils.PeriodBetween(t1,t2)  
    Return $"$2.0{pd.Hours}:$2.0{pd.Minutes}"$
End Sub