Android Example Dual Screen using MQTT

An example of sending data from device A and display on device B screen using MQTT protocol.
This is one of the solutions to this thread.
The code is kept since Aug 2023 but I don't see any one bother to ask how to implement it.
Today I share it but I hope people have really tried on their own, not waiting to get spoon feed.

Update:
Version 2 add B4J projects and tested with jMQTT v1.26 and jMqttBroker2ext v2.02 by @teddybear

There is another example using UDP which I am going to share next.

 

[aeric]

Note:
I am using jMQTT v1.01 and jMQTT Broker v1.04
I haven't tested with newer version of jMQTT or jMQTT Broker.

 

[amorosik]

Hi Aeric, your project is very interesting
Have you tried to make some comparisons regarding the performances between the project via Udp and the project via Mqtt?

 

[aeric]

Hi Aeric, your project is very interesting
Have you tried to make some comparisons regarding the performances between the project via Udp and the project via Mqtt?

No, I didn't explore further into this topic.
There are pros and cons or different use cases between the 2 solutions.
1 different I can see from my demo YouTube video is the MQTT solution shows the client connected and disconnected.
I am not sure how this is implemented in UDP.
In fact I am new to both solutions and I just created the examples based on my learning in a few hours, so bear with me.

 

[aeric]

Nice! I’ve been working with MQTT recently so this comes at the right time. Looking forward to the UDP example too. Thanks for sharing!

Thanks!
Yes I think this is a good example to showcase the use of mqtt.
I actually updated the first post to UDP example.
The example just show a message box instead but the concept is same.
You can direct access the post here:

Dual Screen using UDP

An example of sending data from device A and display on device B screen using UDP protocol. This is one of the solutions to this thread. The code is kept since Aug 2023 but I don't see any one bother to ask how to implement it. Today I share it but I hope people have really tried on their own...

www.b4x.com

 

[Olaan]

Thanks!
Yes I think this is a good example to showcase the use of mqtt.
I actually updated the first post to UDP example.
The example just show a message box instead but the concept is same.
You can direct access the post here:

Dual Screen using UDP

An example of sending data from device A and display on device B screen using UDP protocol. This is one of the solutions to this thread. The code is kept since Aug 2023 but I don't see any one bother to ask how to implement it. Today I share it but I hope people have really tried on their own...

www.b4x.com

Thank you, Aeric for sharing them.Let me write the contents in Thai forum followingmy understanding. Thank you in advance.

 

[aeric]

Update:
Version 2 add B4J projects and tested with jMQTT v1.26 and jMqttBroker2ext v2.02 by @teddybear