Here is a "crude" oscilloscope using the IOIO circuit board. It is a variation of the geoffcwicks IOIOB4DEMO software. My apologies for the "noisy" signal in the accompanying jpg, but my signal generator is old (like me) and not in the best shape. The signal is applied to pin 40 (one of the A/D channels) and ground. Be sure to limit the input signal to between ground and 3.3 volts. Connect a 5 volt supply to the 5v pin on the IOIO and gnd to one of the gnd pins. I hope folks find this useful........the IOIO A/Ds are not exactly high sample rates (1000sps) according to the specs. Improvements should be forthcoming in future generations, but IOIO combined with B4A is awesome!!!!!
4.4 KB Views: 791