B4A Library library "Wagoïd"

My library "Wagoïd" to communicate with a WAGO 750-841 plc

function

IP (hostname or adress ip)

Connected
Disconnected

Read_input_digital (adr,count)

Read_output_digital(adr,count)
Write_output_digital(adr,bit)

Read_input_analog (adr)
Write_output_analog (adr,value)

Read_memory(adr)
Write_memory(adr,value)

 

[alan1968]

the file ...

a simple exemple for use function

http://uploading.com/files/5f2d792d/Exemple+wagoide.rar/

 

[ith]

question to hostname ip

hello alan

congratulations for your work

it`s realy great

it`s possible to connect a wago controller in the intranet, but never above the www

for example i would connect me from the work, it doesn`t work
my controller is reachable across a dyndns account and portforwording, so i enterd the adress in the "my wago.ip"
the basic4android compiler shows me an error, because it cannot dissoliving the host

have you an idea for this problem

thanks!

 

[alan1968]

hello
thank you for the compliment

did you open port 502 on your router?

http://www.wago.com/wagoweb/documentation/app_note/a1032/a103208e.pdf

send my a feedback

 

[alan1968]

a review !

iTuilerie » Pilotage d’un Automate Wago 750-841 par Android

 

[Erel]

Well done :icon_clap:

 

[oymyakon]

Wago

Hi, Where can i get your wago library? Is it modbus based as i am loking to use modbus on a product i am developing.

Cheers Paul.

 

[alan1968]

Hi, Where can i get your wago library? Is it modbus based as i am loking to use modbus on a product i am developing.

Cheers Paul.

donwload free here :http://www.b4x.com/forum/attachment...tes/9133d1319778663-library-wagoid-wagoid.zip

 

[magicmarcus]

I try to download free file but this's not free :-(

 

[oymyakon]

Modbus

Is there anywhere in your library to put the modbus address?

Paul.

 

[artexx]

use with S7 PLC

very nice lib.
Is it possible to use it with S7 PLC changing the modbus address from 0 to 1 or there are further changes required?
Thanks
Artexx

 

[Erel]

For some reason you appear as an unlicensed user in the forum. Please contact [email protected] in order to fix it.

 

[PC999]

Hi Alan, Where can i get your wago library ? The link you posted does not work
PC

 

[Ferraz71]

Hi Allan, very nice job.
I have an open port RS485 in my hardware that I can configure with the "SetPort (" / dev/ttymxc0 ", 9600.0)" command. Can I use the library wagoid to communicate through this port?

My hardware (imx53 tablet with android 2.3.4) will be the master of the Modbus network and will read various sensors.

 

[Quaki]

Hi where can I find the example for this lib (link from Alan works but when I try to download it I recive malvare )
Best regards