Hi dennishea,
Thank you and sorry for no helpfile! I am from germany and my english is not so good, but i have done my best to translate the textboxes. I hope it will help you a litle bit.
>If you could give a small text file explaining how to use it it would be helpful.
Every symbol has an action point (the left upper corner). If you want to delete the symbol, you have to click on this action point. If you hit it, the symbol gets blue, if not, you get a messagebox. There is a catchfunction for the grid, so you have not exactly to hit the point.
To mark a line, you have to hit the startingpoint (= action point).
To make a group, you had to built a rectangle. Mark the left upper corner and then the right lower corner. Now you can see a blue rectangle and every action point inside built the new group.
>I think it would useful even to the home owner with a small network.
Not only for the own network, also for the networks which you administer of friends.
>I would be more than happy to look for bugs. Also if you don't mind I would like to adapt it to create a drawing of a machine tooling setup. The symbol's would be generic tools placed in there relative positions.
you are welcome
Best wishes
mamuen