M Mostez Well-Known Member Licensed User Longtime User May 15, 2019 #1 Hello, I tried to compile this code example (ESP32S board) but I got this error even after updating ESP32 SDK and intalling latest arduino IDE. any ideas how to solve this problem? Thanks B4R Version: 2.60 Parsing code. (0.00s) Building folders structure. (0.00s) Compiling code. (0.00s) Building project (0.03s) Compiling & deploying Ino project (DOIT ESP32 DEVKIT V1 - COM20) Error Loading configuration... Initializing packages... Preparing boards... Verifying... exec: "C:\\Users\\Halim\\Documents\\Arduino\\hardware\\espressif\\esp32/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++": file does not exist
Hello, I tried to compile this code example (ESP32S board) but I got this error even after updating ESP32 SDK and intalling latest arduino IDE. any ideas how to solve this problem? Thanks B4R Version: 2.60 Parsing code. (0.00s) Building folders structure. (0.00s) Compiling code. (0.00s) Building project (0.03s) Compiling & deploying Ino project (DOIT ESP32 DEVKIT V1 - COM20) Error Loading configuration... Initializing packages... Preparing boards... Verifying... exec: "C:\\Users\\Halim\\Documents\\Arduino\\hardware\\espressif\\esp32/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++": file does not exist
thetahsk Active Member Licensed User Longtime User May 15, 2019 #2 Mostez said: .. Click to expand... Open [ARDUINO_SKETCHBOOK_DIR]/hardware/espressif/esp32/tools and double-click get.exe Upvote 0
Mostez said: .. Click to expand... Open [ARDUINO_SKETCHBOOK_DIR]/hardware/espressif/esp32/tools and double-click get.exe
M Mostez Well-Known Member Licensed User Longtime User May 16, 2019 #3 i ran get.exe, but nothing new, it seems that there is an error, but i could not read the message because the popup window disappeared quickly. EDIT: I captured image of get.exe execution result window Attachments Untitled.png 111.4 KB · Views: 702 Last edited: May 16, 2019 Upvote 0
i ran get.exe, but nothing new, it seems that there is an error, but i could not read the message because the popup window disappeared quickly. EDIT: I captured image of get.exe execution result window
Erel B4X founder Staff member Licensed User Longtime User May 16, 2019 #4 I do see this file here. Try to reinstall ESP32 SDK. Upvote 0
thetahsk Active Member Licensed User Longtime User May 16, 2019 #5 turn off your antivirus progr's and run get.exe as admin. Upvote 0
M Mostez Well-Known Member Licensed User Longtime User May 16, 2019 #6 downloaded SDK again, stopped anti virus and ran get.exe as admin, same error Upvote 0
T Toley Active Member Licensed User Longtime User May 16, 2019 #7 https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/boards_manager.md Upvote 0
thetahsk Active Member Licensed User Longtime User May 19, 2019 #9 Mostez said: it did not work too Click to expand... Can you compile a simple Arduino sketch ? Upvote 0
M Mostez Well-Known Member Licensed User Longtime User May 19, 2019 #10 yes i can compile Arduino sketches Upvote 0
Erel B4X founder Staff member Licensed User Longtime User May 20, 2019 #11 Is the file from the error message, there? Upvote 0
M Mostez Well-Known Member Licensed User Longtime User May 20, 2019 #12 "xtensa-esp32-elf-win32-1.22.0-80-g6c4433a-5.2.0.zip" is exist, but it always fails to extract it. I tried to open it manually but it said it is damaged. i downloaded this file two times(erase old one and download) Edit: the ZIP file is 0 bytes Attachments zip_err.jpg 47.2 KB · Views: 668 zip_file.jpg 23.5 KB · Views: 618 size.jpg 27.9 KB · Views: 622 Last edited: May 20, 2019 Upvote 0
"xtensa-esp32-elf-win32-1.22.0-80-g6c4433a-5.2.0.zip" is exist, but it always fails to extract it. I tried to open it manually but it said it is damaged. i downloaded this file two times(erase old one and download) Edit: the ZIP file is 0 bytes
Erel B4X founder Staff member Licensed User Longtime User May 20, 2019 #13 The missing file is: C:\\Users\\Halim\\Documents\\Arduino\\hardware\\espressif\\esp32/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++ It should look like this: Upvote 0
The missing file is: C:\\Users\\Halim\\Documents\\Arduino\\hardware\\espressif\\esp32/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++ It should look like this:
thetahsk Active Member Licensed User Longtime User May 20, 2019 #14 Mostez said: "xtensa-esp32-elf-win32-1.22.0-80-g6c4433a-5.2.0.zip" is exist, but it always fails to extract it. I tried to open it manually but it said it is damaged. i downloaded this file two times(erase old one and download) Edit: the ZIP file is 0 bytes Click to expand... Try this link https://dl.espressif.com/dl/xtensa-esp32-elf-win32-1.22.0-80-g6c4433a-5.2.0.zip Upvote 0
Mostez said: "xtensa-esp32-elf-win32-1.22.0-80-g6c4433a-5.2.0.zip" is exist, but it always fails to extract it. I tried to open it manually but it said it is damaged. i downloaded this file two times(erase old one and download) Edit: the ZIP file is 0 bytes Click to expand... Try this link https://dl.espressif.com/dl/xtensa-esp32-elf-win32-1.22.0-80-g6c4433a-5.2.0.zip
M Mostez Well-Known Member Licensed User Longtime User May 20, 2019 #15 No Erel, I don't have such files Upvote 0
M Mostez Well-Known Member Licensed User Longtime User May 20, 2019 #16 downloaded the file to C:\...espressif\esp32\tools\dist folder and ran get.exe, the file extracted OK, I could upload simple code to ESP32S Thanks thetahsk, thanks Erel Upvote 0
downloaded the file to C:\...espressif\esp32\tools\dist folder and ran get.exe, the file extracted OK, I could upload simple code to ESP32S Thanks thetahsk, thanks Erel
