iOS Question Sending data to remote compiler. Error

[Zkshazly]

Hello,
I have just install B4i and tried to install B4i bridge and followed the tutorial steps until the certification enabled<B4I> on my phone
then when I ran the application it gave this message :
Sending data to remote compiler. Error

so, what is wrong and how to install B4i Bridge?

Thank you very much
Zakaria

 

[JohnC]

The "B4i Bridge" app is used when the B4i IDE is trying to talk to the device.

But the problem you are reporting of "Sending data to remote compiler - Error" seems like it's an issue with B4i trying to talk to the remote "Hosted Mac" service - did you also buy a subscription to that service, or are you using a local mac?

 

[Zkshazly]

Thank you very much for your reply
I have just bought B4I with Builder and I got the ID for the Builder through < Tools -> Build Server -> Server Settings. > and tick the "Use Hosted Builder" option.
the following was occurred:
1. during installation, B4i did not ask about the licence file & the E-mail of the buying invoice
2.I am using PC with Windows 10
3. I have a set of iPhone to install B4i bridge on it but stuck with the error

Thank you again for your support

 

[JohnC]

Right above where you ticked "Use Hosted Builder" - did you enter the "User ID" you received?

 

[Zkshazly]

Thanks
the following is an image:

of course I input the ID sent nut here in the image I removed it

 

[JohnC]

Other then making sure your antivirus or firewall is not blocking connections from B4i, I'm out of ideas at this point.

 

[Zkshazly]

I followed the instruction in the following page:
https://www.b4x.com/android/forum/threads/installing-b4i-bridge-and-debugging-first-app.45871/
but stuck in this error ...
Could any body support?

 

[Erel]

Not related to this error but it is better to set the architecture to 64 bit unless you are using a very old phone.

Do you see this error when you try to build B4i-Bridge?

 

[Zkshazly]

Thank you very much
I made it 64 bit and gave same error
I use iPhone <13+>


Do you see this error when you try to build B4i-Bridge?
< the answer is yes ... this error came during trying to build B4i bridge>

 

[Erel]

Are you able to access this link from your development computer: http://builder1.b4x.com:51041/test ?

 

[Zkshazly]

Yes,
the first 3 lines:
B4i Build Server
Build server is running.
Version: 6.51

 

[Erel]

1. Try to switch to the secondary builder.
2. Make sure that the package name is correct and matches the app id that you set.

 

[Zkshazly]

Thank you
1. Try to switch to the secondary builder. --> OK I will do this
2. Make sure that the package name is correct and matches the app id that you set. --> sorry, How to do this? Could you Pls., clarify More?

Thanks a lot for your Patient and support

 

[Erel]

Make sure that the package name is correct and matches the app id that you set. --> sorry, How to do this? Could you Pls., clarify More?

Click on Ctrl + B. You will see the package name.

Your app id should be something like:
something.unique.*

Your package name should then be:
something.unique.app1

 

[Zkshazly]

Thank you very much
Still come same error:
Pls, see below for more information to try to solve the problem:
Paths:

Build Configuration:

Build server setting

Error Message

Thank you very much for your support

 

[JohnC]

OK, so it appears the error was not with B4I trying to talk to the remote builder - the actual error is with the "mobileprovision" file is missing.

You need to follow the steps on this page to reinstall the B4I-bridge:

Installing B4i-Bridge and debugging first app

B4i-Bridge is an application that you install on the device. It has three purposes: 1. Launch the installation process when needed. This step is done with Apple Configurator 2 if using a local builder (https://www.b4x.com/android/forum/threads/installing-apps-with-apple-configurator-2.128397/)...

www.b4x.com

 

[Zkshazly]

Thank you very much
I have the following :

so, my question ... is it a mandatory to have Apple account developer to simulate the app on Apple phone device using the builder
<is that I do not have apple account developer the cause of the error>?

Thank you very much

 

[Erel]

I don't understand anything from this thread. How come you only post the "real" error in post #15?

See the requirements section: https://www.b4x.com/b4i.html
They are accurate.

I'm locking this thread as all the posts are irrelevant.