saunwin Active Member Licensed User Longtime User Sep 16, 2018 #1 Morning, Q. - I have a serial port connected to a Bluetooth adapter (one of those cheap SPP-C modules). I send it a couple of AT commands but the last character of the string is always missing. I can use teraterm and manually enter the AT commands aall is correct, when I log the sending strings all look correct, but the response always has the last character of the string missing. Sending the AT command from my app then reading back in teraterm confirms that the BT module has "dropped" the final character. so I must conclude there is something amiss in the sending routine. Log also seems to be receiving some random CRLF's in the module replies. Any ideas ? TIA Sending code Code: Copy Sub setbutton_MouseClicked (EventData As MouseEvent) If astream.IsInitialized = False Then Return Dim s As String Dim buffer() As Byte If btname.Text.Length > 0 Then s ="AT+NAME"&btname.Text&CRLF buffer = s.GetBytes("UTF8") astream.Write(buffer) Log("Sending: " & s) End If If Pinfield.Text.Length = 4 Then s ="AT+PIN"&Pinfield.Text&CRLF buffer = s.GetBytes("UTF8") astream.Write(buffer) Log("Sending: " & s) End If End Sub Reading code Code: Copy Sub AStream_NewData (Buffer() As Byte) Dim s As String = BytesToString(Buffer, 0, Buffer.Length, "UTF8") Log (s) End Sub
Morning, Q. - I have a serial port connected to a Bluetooth adapter (one of those cheap SPP-C modules). I send it a couple of AT commands but the last character of the string is always missing. I can use teraterm and manually enter the AT commands aall is correct, when I log the sending strings all look correct, but the response always has the last character of the string missing. Sending the AT command from my app then reading back in teraterm confirms that the BT module has "dropped" the final character. so I must conclude there is something amiss in the sending routine. Log also seems to be receiving some random CRLF's in the module replies. Any ideas ? TIA Sending code Code: Copy Sub setbutton_MouseClicked (EventData As MouseEvent) If astream.IsInitialized = False Then Return Dim s As String Dim buffer() As Byte If btname.Text.Length > 0 Then s ="AT+NAME"&btname.Text&CRLF buffer = s.GetBytes("UTF8") astream.Write(buffer) Log("Sending: " & s) End If If Pinfield.Text.Length = 4 Then s ="AT+PIN"&Pinfield.Text&CRLF buffer = s.GetBytes("UTF8") astream.Write(buffer) Log("Sending: " & s) End If End Sub Reading code Code: Copy Sub AStream_NewData (Buffer() As Byte) Dim s As String = BytesToString(Buffer, 0, Buffer.Length, "UTF8") Log (s) End Sub
saunwin Active Member Licensed User Longtime User Sep 16, 2018 #2 OK - It's taken me all day and a poke about with my logic analizer but it's now fixed. The SPP-C (Hc-06 copy) requires AT command termination with \r\n This MAY help someone. the line: - s ="AT+NAME"&btname.Text&CRLF should be :- s ="AT+NAME"&btname.Text& Chr(13) & Chr(10) &CRLF does not = \r\n - (only an \n is sent). Chr(13) is \r and Chr(10) is \n Upvote 0
OK - It's taken me all day and a poke about with my logic analizer but it's now fixed. The SPP-C (Hc-06 copy) requires AT command termination with \r\n This MAY help someone. the line: - s ="AT+NAME"&btname.Text&CRLF should be :- s ="AT+NAME"&btname.Text& Chr(13) & Chr(10) &CRLF does not = \r\n - (only an \n is sent). Chr(13) is \r and Chr(10) is \n
DonManfred Expert Licensed User Longtime User Sep 16, 2018 #3 https://www.b4x.com/android/forum/pages/results/?query=crlf Upvote 0
saunwin Active Member Licensed User Longtime User Sep 17, 2018 #4 Thanks for that link DonManfred, I also found that although I was getting the correct response from the BT module, the AT commands were flakey and often not working at all. there needs to be a delay of about 2 seconds between AT commands. All seems good now. Upvote 0
Thanks for that link DonManfred, I also found that although I was getting the correct response from the BT module, the AT commands were flakey and often not working at all. there needs to be a delay of about 2 seconds between AT commands. All seems good now.