iOS Question [Solved]Sending data to remote compiler. Error / Communication error: ConnectFailure

[MitchBu]

Help !

 

[Andrew (Digitwell)]

It seems to be working for me.
I can compile against the remote compiler.
Maybe it was a brief glitch???

Have you tried http://63.135.170.51:51041/test to connect to hosted builder?

 

[MitchBu]

Have you tried http://63.135.170.51:51041/test to connect to hosted builder?

I just did this, it says build server is running.

I tried to ping the server, and got this:

Pinging 192.168.0.100 with 32 bytes of data:
Request timed out.
Request timed out.

 

[Andrew (Digitwell)]

Pinging 192.168.0.100 with 32 bytes of data: Request timed out. Request timed out.

This address looks like a local address not the remote address of the server the remote address is 63.135.170.51

C:\Users\Andrew>ping 63.135.170.51

Pinging 63.135.170.51 with 32 bytes of data:
Reply from 63.135.170.51: bytes=32 time=97ms TTL=50
Reply from 63.135.170.51: bytes=32 time=98ms TTL=50
Reply from 63.135.170.51: bytes=32 time=97ms TTL=50
Reply from 63.135.170.51: bytes=32 time=98ms TTL=50

Ping statistics for 63.135.170.51:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 97ms, Maximum = 98ms, Average = 97ms

 

[Erel]

Are you using a local builder (your own Mac) or the hosted builder ?

 

[MitchBu]

I have solved the issue, by setting to hosted builder.

Thank you both