KMatle Expert Licensed User Longtime User Feb 18, 2015 #21 I'm in! @maso1975 But first: The 3,5mm jack is good to play AND record on any android device? How do we switch the send/receive "Button" on the transceiver? (hopefully it has an auto mode) Did you try the example from Klaus?
I'm in! @maso1975 But first: The 3,5mm jack is good to play AND record on any android device? How do we switch the send/receive "Button" on the transceiver? (hopefully it has an auto mode) Did you try the example from Klaus?
lemonisdead Well-Known Member Licensed User Longtime User Feb 19, 2015 #22 How do we switch the send/receive "Button" on the transceiver Click to expand... You are right : the VOX of the transceiver can do the switch automatically
How do we switch the send/receive "Button" on the transceiver Click to expand... You are right : the VOX of the transceiver can do the switch automatically
T Troberg Well-Known Member Licensed User Longtime User Feb 19, 2015 #23 KMatle said: The 3,5mm jack is good to play AND record on any android device? Click to expand... Yes, probably. I say probably, because there might be some oddball device out there, but in theory, it should work on every device. KMatle said: How do we switch the send/receive "Button" on the transceiver? (hopefully it has an auto mode) Click to expand... As Lemon said, VOX will help, but be aware that VOX usually don't cut in immediately. Very annoying when you talk, as it cuts half the first word. So, first send a dummy signal for VOX to react on, then after, say, two seconds, start sending the real message.
KMatle said: The 3,5mm jack is good to play AND record on any android device? Click to expand... Yes, probably. I say probably, because there might be some oddball device out there, but in theory, it should work on every device. KMatle said: How do we switch the send/receive "Button" on the transceiver? (hopefully it has an auto mode) Click to expand... As Lemon said, VOX will help, but be aware that VOX usually don't cut in immediately. Very annoying when you talk, as it cuts half the first word. So, first send a dummy signal for VOX to react on, then after, say, two seconds, start sending the real message.
KMatle Expert Licensed User Longtime User Feb 19, 2015 #24 What about this one (in Germany you get 2 for the same price): http://www.ebay.co.uk/itm/BaoFeng-U...864?pt=LH_DefaultDomain_3&hash=item19fbf63838 5-8 KM distance (here in Germany you "need" a license to use it)
What about this one (in Germany you get 2 for the same price): http://www.ebay.co.uk/itm/BaoFeng-U...864?pt=LH_DefaultDomain_3&hash=item19fbf63838 5-8 KM distance (here in Germany you "need" a license to use it)
lemonisdead Well-Known Member Licensed User Longtime User Feb 19, 2015 #25 Theorical distance. 5-8 km in counties but 1km in some cities and more than 500 km in clear vision between the two points with the same height. Generally saying : the higher the frequency the longest the distance in clear conditions. The good point here is the FM avaibility for modem communications which could be very stable. You can put the frequency in the 8 PMR446 channels in Eu and nobody will know the power of your device.
Theorical distance. 5-8 km in counties but 1km in some cities and more than 500 km in clear vision between the two points with the same height. Generally saying : the higher the frequency the longest the distance in clear conditions. The good point here is the FM avaibility for modem communications which could be very stable. You can put the frequency in the 8 PMR446 channels in Eu and nobody will know the power of your device.
T Troberg Well-Known Member Licensed User Longtime User Feb 19, 2015 #26 One additional not about VOX. It does not "let go" immediately when things go quiet, so if you are going to send a response, you'll have to wait a bit there as well.
One additional not about VOX. It does not "let go" immediately when things go quiet, so if you are going to send a response, you'll have to wait a bit there as well.
Beja Expert Licensed User Longtime User Mar 30, 2015 #27 Folks, Pardon my not so smart question! Why don't you guys just use the B4A chat example and customize it as you wish?
Folks, Pardon my not so smart question! Why don't you guys just use the B4A chat example and customize it as you wish?
maso1975 Member Licensed User Longtime User Mar 30, 2015 #28 Hi Beja, my intention is to use the example in B4A and customize it, I'm working on it, but I have little time for this, when it publishes achieve some progress here.
Hi Beja, my intention is to use the example in B4A and customize it, I'm working on it, but I have little time for this, when it publishes achieve some progress here.
