B4R Question The Possibility of using the esp8266 01

[Cesar_Morisco]

Hello everything is fine
The Possibility of using the esp8266 01 Using mqtt to send and receive data via serial port
I want some proceeds that I have here if anyone can give me some guidance I would appreciate it
I thank.
Approving my post
I wish everyone a
"Merry Christmas"

 

[janderkan]

Have you ever tried the search function ?

 

[Cesar_Morisco]

Hi Janderkan, how are you?
I didn't
specifically with serial output from esp8266 01
There aren't many examples using it
I thank

 

[Cesar_Morisco]

Hi Pesoal
I don't understand MQTT much
There are two types, one sternum and one internal and that
Please explain to me

 

[XorAndOr]

The Possibility of using the esp8266 01 Using mqtt to send and receive data via serial port

Yes, it is possible.
You've tried? what doesn't work for you?

 

[Cesar_Morisco]

Yes, it is possible.
You've tried? what doesn't work for you?

Hello everything is fine
Using log I can receive the data via serial to the PIC12f675 From the PIC12f675 To send to the Esp8266 I have no idea how to do this
I thank

 

[candide]

here you can find something near what you want to do :

Connecting ESP8266 and Arduino with rSoftwareSerial library

An example of connecting an ESP8266 (NodeMCU used for this experiment) and an Arduino MEGA. The Arduino runs B4R and the ESP8266 runs ESP8266 Basic. Note 1: Using ESP8266 Basic is for the time being = awaiting for B4R to run on ESP8266 BUT it shows the integration between B4R and other...

www.b4x.com

 

[XorAndOr]

From the PIC12f675 To send to the Esp8266 I have no idea how to do this

To communicate you need the Serial TX-RX uart
I'm not sure if the PIC12F675 uses uart.
If yes then you can make ESP-01 communicate with the PIC.

 

[Cesar_Morisco]

Aqui você pode encontrar algo perto do que você quer fazer:

Connecting ESP8266 and Arduino with rSoftwareSerial library

An example of connecting an ESP8266 (NodeMCU used for this experiment) and an Arduino MEGA. The Arduino runs B4R and the ESP8266 runs ESP8266 Basic. Note 1: Using ESP8266 Basic is for the time being = awaiting for B4R to run on ESP8266 BUT it shows the integration between B4R and other...

www.b4x.com

Hello my friend Candide, how are you?
I think the example you gave me works, I have no idea how to use it to receive mqtt data and send data
to thank

 

[Cesar_Morisco]

To communicate you need the Serial TX-RX uart
I'm not sure if the PIC12F675 uses uart.
If yes then you can make ESP-01 communicate with the PIC.

Hi XorAndOr how are you?
The PIC12F675 has using the SERIN2 command RX_IN,84,300,TimeOut,[WAIT("CMDA"),DATA_IN] it works by receiving the log
Thank you, I'll see here