Hi Again
As promised, here is a post on my progress (which appears to raise an interesting question).
To prevent causing problems with my development project I decided to install B4i on my laptop.
1. Went through the whole process of installing B4i on my laptop and followed the tutorial
Creating a certificate and provisioning profile to generate fresh certificates and provisioning profiles using a new Keys folder (but did use a previously generated App ID and the UDID Device was already setup).
2. Ran up B4i and loaded a "Test Project". Compiled and run the code (in debug) on a test phone without problems (as expected).
3. Pleased with my progress, I decided to make a copy of my "Development project" (along with its Key folder) and copy it to my Laptop machine.
4. I then changed on my Laptop (under Tools->Configure Paths) the "Keys folder" path to the "Development project" key folder (using the Browse button to avoid typo errors). Compiled and run the code (in debug) on a test phone without problems (as expected).
5. Next I switched to the "Test Project" but used the "Development project" keys folder. This time it failed to compile with the same message as shown in my first post.
I assume this problem relates to me using different Keys folders (with different certSigningRequest.csr files) -
The question is can these folders be merged into one Keys folder (however, some of the files do share the same name).
Kind regards
Dave