iOS Question Debug connect to device error for remote mac

[cambol]

I set a mac in remote site :
LAN IP : 192.168.1.100
getway : 192.168.1.254
mac had build Simulator for IOS


getway is a ip router
LAN IP: 192.168.1.254
WAN IP : 59.125.10.10

Ip router set NAT
NAT set : 59.125.10.10 port: 51041 ~ 51042 NAT to 192.168.1.100 port :51041 ~ 51042 for B4i Build server
also set : 59.125.10.10 port: 58190 - 58195 NAT to 192.168.1.100 port :58190 - 58195 for debugger connects


In home :
MY device IP: 192.168.0.15
IN B4i : Build server setting , Server ip : 59.125.10.10
When I use B4i compile and run , My iphone show can not connect : 59.125.10.10

but I change device to simulator ,B4i compile and run can install to simulator

What port for NAT for firewall I lost in remote site mac server and ip router .

 

[Erel]

Why not use the hosted builder for a remote solution? The price is quite low.

Make sure that the ip address printed when the builder starts is exactly the same as the address you are using to connect. Otherwise the SSL key will be rejected.