Layout help

[rfsingh81]

Hi, I would like some help or pointers in laying out this format. I have 7 buttons which I would like to arrange in the following way so they can work on normal phones/tablets etc.
I tried this but it doesn't work:

Btn1.SetTopAndBottom(5, 25%y)
Btn1.SetLeftAndRight(5, 30%x)
Btn2.SetLeftAndRight(Btn1.Right,30%x)
Btn2.SetTopAndBottom(5, 25%y)
Btn3.SetLeftAndRight(Btn2.Right,5)
Btn3.SetTopAndBottom(5, 25%y)

Btn4.SetLeftAndRight(5,30%x)
Btn4.SetTopAndBottom(Btn1.Bottom, 25%y)

Btn_Stat.Top(Btn4.Bottom)
Btn_Stat.Width=100%x

I am able to do it with one on top of another, ladder style, but it is not the best looking way to do it, so I want some code help with doing it 3 on top and 3 on bottom + 1 below everything (number 7). Thanks in advance. Cheers!

 

[Geezer]

The code is to set the left and right values, not the width.

Btn1.SetLeftAndRight(5, 30%x)

Sets Btn1 left at 5 and right at 30%x

Btn2.SetLeftAndRight(Btn1.Right,30%x)

Set Btn2 left at the btn1.Right, which is fine, but the left is also set to the same point.

Btn2.SetLeftAndRight(Btn1.Right,60%x)

Would make more sense, or even

Btn2.SetLeftAndRight(Btn1.Right, Btn1.Right + Btn1.Width)

That way, your button would be the same width, and you would just need to adjust the width of button 1 to adjust the following buttons.