Table issue

[park jae hyun]

Hi
Main tabhost
And
view tabhost
There are two ..
1 ... view tabhost to work with in the table ...
2 ... and the main tabhost goes ....
3 ... View tabhost comes back left corner of the table will be displayed on the small ..
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It makes the problem three times
Sorry I did not speak English

 

[klaus]

Could you please explain in detail what your problem is.
What is a table for you?
What is Main TabHost ?
What is View TabHost ?

2 ... and the main tabhost goes .... ???
3 ... View tabhost comes back left corner of the table will be displayed on the small .. ???

To expect a concrete answer you must be more clear and precise.

Best regards.

 

[park jae hyun]

2 are on the program tabhost.
tabhost1 (table)
tabhost2 (main)

When it comes to the table tabhost1 is running.
But when I went to tabhost2 ...
tabhost1 on the left side of the table is very small display.


tabhost1 (table) -> tabhost2 (main) -> tabhost1 (table)
This table will be displayed on the left is very small
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'm hard to understand English and are you immature.
If you're not, please leave post .. Let me explain again.

 

[klaus]

Could you please post your code, it would be much easier to see what happens.

Best regards.

 

[park jae hyun]

The code is generated.

tabhost1 ....
tabhost2 ....
There are two.
the main tabhost1
a table showing tabhost2

tabhost1 (main) -> tabhost2 (table) -> tabhost1 (main) -> tabhost (table)
Is in order.
Second order, the table looks good.
However, fourth order, the table does not seem

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
And in addition to the table tabhost tab order and security and therefore would like to show.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please also understand English, lame ..

 

[park jae hyun]

table

help me

 

[klaus]

Attached you find a version how I would do it.

Best regards.

 

[park jae hyun]

table

Another point is the source also gave up any questions ...
But ...
My biggest problem
2 tabhost
1 ... main tabhost
2 ... table tabhost

main tabhost -> table tabhost (the first is a good look.) -> main tabhost -> table tabhost (here is the problem.)
Initially, the tables show back on the table tabhost main tabhost enters the table does not see it.

~~~~~~~~~~~~~
main tabhost serves a menu ..

Please check the source from me again ...
Thank you.

 

[park jae hyun]

table

table

 

[park jae hyun]

help me

help me

 

[klaus]

I have spend quite some hours trying to make it work as you want it.
I am not shure if I am missing something evident or if it is a bug.

Attached my last test version.
Erel, could you please have a look at it ?
- click on Tab zzz
- click on button Table, the ScrollView is shown,
- click on Tab main
- click on button main
- click on Tab zzz
- click on button Table, the ScrollView is NOT shown ?

Nevertheless, for me, the way you switch between the different Tabs is too complicated. The proposal I sent you in post #7 is much more simple.

Best regards.

 

[Erel]

I wasn't able to follow the complete layouts logic. Are you sure that you only initialize SV once and add it to the correct parent?

 

[park jae hyun]

help

Thank you .. always
But ...
Can not understand.
Please help ..

 

[klaus]

Can you please explain what kind of menu you want to realize with the different TabHosts.
Normaly only ONE TabHost would be sufficient and acts like a menu as shown in my test program in post 7.
You have in the MainTabHost two tabs on main and the second one with a button just to jump into you second TableTabHost.
In the TableTabHost you have one tab to display the table and a second one with a button to go back to the MainTabHost.
All this is done with one TabHost with two tabs and does what you want.
If your needs are different you should explain them more precicely.

Best regards.

 

[park jae hyun]

table

1 .. Main tabhost
There's three kinds of menus
a.. settings
b.. enter
c.. view
2 .. table tabhost
c.. Click to view the table shows, when
Again
Main tabhost go
b.. To enter go to work
Again
c.. .. Click to view the

Repeat the operation ..

These structures are ...
table tabhost
Have a lot of tabs
So
can be used with tabhost 1,2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Always thanks for your help.

 

[klaus]

Why wouldn't you use something like the attached example program.

Best regards.

 

[park jae hyun]

Always thanks for your help.

Always thanks for your help.