Hello colleagues, because you will see in my second application I'm doing pretend controlled from my Galaxy Note a control card TCP / IP, in case some were wondering is this specifically.
Denkovi Assembly Electronics Ltd.: Wi-Fi IEEE 802.11 b / g Data Acquisition I / O Module
Well, the fact is that using Astream, if I managed to send Sockets to activate the relays, although I must say that does not always respond quickly, and is not an issue of the card.
My dilemma is that this card every time you sent a Socket, she responds with the state, something like an ACK.
example:
Set all relays (Whole PortA) ON. Actually all the OJ are in high level.
Send: 00ASG = FFFF;
Receive: 00AS0 = 0;
If someone would kindly tell me where to find a clear example where i see how to send / receive data. Also this card has the ability to use as a method of encriptacio RC4 to see if someone tells me if i can use in B4a.
Greetings and many thanks in advance.
Denkovi Assembly Electronics Ltd.: Wi-Fi IEEE 802.11 b / g Data Acquisition I / O Module
Well, the fact is that using Astream, if I managed to send Sockets to activate the relays, although I must say that does not always respond quickly, and is not an issue of the card.
My dilemma is that this card every time you sent a Socket, she responds with the state, something like an ACK.
example:
Set all relays (Whole PortA) ON. Actually all the OJ are in high level.
Send: 00ASG = FFFF;
Receive: 00AS0 = 0;
If someone would kindly tell me where to find a clear example where i see how to send / receive data. Also this card has the ability to use as a method of encriptacio RC4 to see if someone tells me if i can use in B4a.
Greetings and many thanks in advance.