The unit creates an ad-hoc network which enables another device to connect to it and share data.
To set up the WiFi connection is a two stage operation, firstly the WiFi device such as a smart phone ot PC must be on the same network, and secondly it needs to be connected to the program that you are using.
ith the unit powered on and connected to your serial equipment scan for wireless networks on the device you wish to connect to. This procedure will vary between devices so consult the user manual of the device you are using.
The device will show on WIFI networks in range. On the list you will see a network with the name "SERIAL-TO-WIFI". Connect to this network as per your devices instructions.
Once connected you need to run the application that accepts Serial over TCP/IP, configure the application to listen on:
IP Address 169.254.1.1 Port 2000
The green STATUS LED should be on constantly to confirm a connection has been made.