iOS Question B4i Bridge not installing

[Tom2525]

iOS - 9.2
B4i - 2.31
Device - 5c

I get to the point where the round icon is on my phone but when I click it, nothing happens. Everything appears to be communicating correctly.

I've tried pushing the icon on my MAC and my Android phone and both attempt to install. However, when I push it on my phone, literally nothing happens.

Is there a conflict between B4i 2.31 and iOS 9.2?

 

[Erel]

Is this the first time that you are installing B4i-Bridge (on any device)?

 

[Tom2525]

Is this the first time that you are installing B4i-Bridge (on any device)?

I installed it one time a year ago and haven't used B4i since then.

 

[Erel]

Your certificate has probably expired. You need to create new certificate and provision profile. You can use the same csr file as before.

 

[Tom2525]

I've tried that a couple of times. Still nothing.

 

[Erel]

Open the provision file with a text editor and make sure that the device UDID is listed there.

I get to the point where the round icon is on my phone but when I click it, nothing happens. Everything appears to be communicating correctly.

Try to restart the device.

 

[Tom2525]

I've done both already. Still nothing.

 

[Erel]

Are you using the hosted builder?

 

[Tom2525]

Local Mac.

Checked everything in more detail and found a possible issue. On my server settings, if I use port 51041, I get a communication error. If I use port 51042, it communicates correctly. However, both ports test correctly when connecting to the bridge app.

 

[Erel]

You need to set it to 51042 in the IDE settings.

I will send you a temporary id for the hosted builder. Please try it with the hosted builder.

 

[Tom2525]

It works. Where's my issue?

 

[Erel]

1. Check the ip address that is printed when you start the server. Make sure that it is correct.
2. The Mac, PC and device must be connected to the same local network.

 

[Tom2525]

1. The IP address is correct. I had to force it using manual:<xxx.....>.
2. They are. I've tried them on two different networks and the same issue occurs.

At first I couldn't see the app so I had to disable the firewall on my MAC. Is there any other setting on my MAC or mobile Safari that I need to verify are correct?

 

[Tom2525]

When I put port 51042 in my server settings, the connection is successful. When I put 51041 in my server settings, I get this output from terminal:

2015-12-17 10:02:29.395:WARNejh.HttpParser:qtp1587487668-114: badMessage: 400 Illegal character for HttpChannelOverHttp@523844b3{r=0,a=IDLE,uri=-}

2015-12-17 10:02:29.399:WARNejh.HttpParser:qtp1587487668-114: badMessage: 400 Illegal character for HttpChannelOverHttp@5cffb084{r=0,a=IDLE,uri=-}

Is that normal?

 

[Tom2525]

2. The Mac, PC and device must be connected to the same local network.

I'm using Parallels. Would that affect anything? The way I have it configured is for the my MAC and Parallels to share the same network card.

 

[Erel]

Is that normal?

As I wrote, you should set it to 51042 in the IDE. Otherwise it will not work.

It sounds like some network problem. Does it work with the simulator?

 

[Tom2525]

This IP is incorrect. Where can I change it?

Mac SSL Key
Key IP: 10.37.129.2
SSL port: 51042

 

[Tom2525]

Looks like the MAC SSL is the root cause. If I can fix the Key IP then it should be able to work.

 

[Erel]

Follow the exact steps from the tutorial: (Multiple Ips section) https://www.b4x.com/android/forum/threads/local-mac-builder-installation.46402/#content

 

[moore_it]

if you use paralles you must start local server first ... after run parallels