Android Question BOSCH GLM120 bluetooth logging (read out data)

[Sickculture]

Hi, I´m reading all your codes and its hard to understand this as non scripter, but I read rangefinder and Bosch. I´ve got a GLM-120C (and a Mileseey D9pro). Both with bluetooth. I´m working on field with a geo app called QGIS and QField. It would be great, to read out the distance, vertical pitch (degree) and perhaps in indirect triangulation measure the linear distance, the pitch and the result of height and length to the upper diagonal point. And all in text csv file for import in QGIS/Qfield. How to get these values in a "simple" workflow?
Found this older thread: Bosch Distance Laser GLM Serie

 

[DonManfred]

You can try this Library.
Hopefully you can use it with your Model.

Bosch GLM100C - MT-Protocol to read Devicemeasurent from Bosch Rangefinder using Bluetooth

This is a B4A Library which uses the Bosch MT-Protocol to read Measurements from Bosch Rangefinders using Bluetooth/BLE. The Library should work with these Devices: static { GLM_100_DEV_TYPES.put("3601K72Y00", "Bosch GLM 100-25 C"); GLM_100_DEV_TYPES.put("00Y27K1063", "Bosch...

www.b4x.com

 

[Sickculture]

for the basics: I must install b4a app on android, right? Than load your project.