Dec 14, 2025 HomeKit32 is a personal hobby project turning the Keyestudio KS5009 Smart-Home kit into a clean, modular automation platform using ESP32, BLE, MQTT and B4X. The ESP32 runs B4R firmware acting as a BLE GATT server and optional MQTT gateway. Clients exist for B4J, B4A, Python, and a Blockly visual programming interface integrated into B4J. All 13 KS5009 devices are supported (LEDs, servos, relays, sensors, LCD, RFID, etc.). Communication uses framed BLE packets and JSON/MQTT payloads. Published on GitHub, Overview. Technical Info: Firmware: ESP32 + B4R, wrapped C++ libraries for performance HMI (Desktop/Android): B4J and B4A using HMI Tiles (ISA-101 Standard) Communication: BLE (UART services), optional MQTT integration for Home Assistant etc. Supported Devices: LEDs, relays, motors, DHT11/22, PIR, buzzer, LCD, servos, RFID, RGB LEDs, etc. Blockly Interface: Visual programming for HomeKit32 devices in B4J > Note: my favorite client solution - will be developed further and published B4J forum. Clients: Python GUI optional for cross-platform control This is a non-commercial learning project, shared for inspiration and discussion. Keyestudio Smart Home Kit ESP32 B4A & B4J BLE Clients B4J Blockly BLE Client - Fully Integrated in Webview, Custom Blocks Click to expand...
HomeKit32 is a personal hobby project turning the Keyestudio KS5009 Smart-Home kit into a clean, modular automation platform using ESP32, BLE, MQTT and B4X. The ESP32 runs B4R firmware acting as a BLE GATT server and optional MQTT gateway. Clients exist for B4J, B4A, Python, and a Blockly visual programming interface integrated into B4J. All 13 KS5009 devices are supported (LEDs, servos, relays, sensors, LCD, RFID, etc.). Communication uses framed BLE packets and JSON/MQTT payloads. Published on GitHub, Overview. Technical Info: Firmware: ESP32 + B4R, wrapped C++ libraries for performance HMI (Desktop/Android): B4J and B4A using HMI Tiles (ISA-101 Standard) Communication: BLE (UART services), optional MQTT integration for Home Assistant etc. Supported Devices: LEDs, relays, motors, DHT11/22, PIR, buzzer, LCD, servos, RFID, RGB LEDs, etc. Blockly Interface: Visual programming for HomeKit32 devices in B4J > Note: my favorite client solution - will be developed further and published B4J forum. Clients: Python GUI optional for cross-platform control This is a non-commercial learning project, shared for inspiration and discussion. Keyestudio Smart Home Kit ESP32 B4A & B4J BLE Clients B4J Blockly BLE Client - Fully Integrated in Webview, Custom Blocks