Beja Expert Licensed User Longtime User Apr 22, 2021 #1 Hi All, The Arduino sketch's tested and all is ok. Now how can I upload the same app to a number of Uno boards? Now uploading one by one.
Hi All, The Arduino sketch's tested and all is ok. Now how can I upload the same app to a number of Uno boards? Now uploading one by one.
Erel B4X founder Staff member Licensed User Longtime User Apr 22, 2021 #2 See this discussion: https://forum.arduino.cc/t/the-simplest-way-to-upload-a-compiled-hex-file-without-the-ide/401996 Remember that B4R generates a regular Arduino project in the Objects\src folder, so you can open it with Arduino IDE. Upvote 0
See this discussion: https://forum.arduino.cc/t/the-simplest-way-to-upload-a-compiled-hex-file-without-the-ide/401996 Remember that B4R generates a regular Arduino project in the Objects\src folder, so you can open it with Arduino IDE.
Beja Expert Licensed User Longtime User Apr 22, 2021 #3 Erel said: See this discussion: https://forum.arduino.cc/t/the-simplest-way-to-upload-a-compiled-hex-file-without-the-ide/401996 Remember that B4R generates a regular Arduino project in the Objects\src folder, so you can open it with Arduino IDE. Click to expand... Thanks Erel Didn't try it but it should work.. What I need to know is (for production) to program a number of boards.. Say 100+ boards.. I don't think the methods above is practical. Remember the EPROM programmer with 8 sockets for 8 EPROM chips to be programmed at once.. Upvote 0
Erel said: See this discussion: https://forum.arduino.cc/t/the-simplest-way-to-upload-a-compiled-hex-file-without-the-ide/401996 Remember that B4R generates a regular Arduino project in the Objects\src folder, so you can open it with Arduino IDE. Click to expand... Thanks Erel Didn't try it but it should work.. What I need to know is (for production) to program a number of boards.. Say 100+ boards.. I don't think the methods above is practical. Remember the EPROM programmer with 8 sockets for 8 EPROM chips to be programmed at once..
KMatle Expert Licensed User Longtime User Apr 22, 2021 #4 Maybe via OTA, but you have to upload an OTA enabled app on it first. Upvote 0
tigrot Well-Known Member Licensed User Longtime User Apr 22, 2021 #5 Connect all your boards to a usb hub. In a program Ask for active com ports then launch avrdude for each com Port. In net you can use System_IO_Ports_SerialPort_GetPortNames. Upvote 0
Connect all your boards to a usb hub. In a program Ask for active com ports then launch avrdude for each com Port. In net you can use System_IO_Ports_SerialPort_GetPortNames.
