Hi, Filippo.
I'm glad you decided to buy the 3D Printer.
But, why does you don´t removed the stickers?
Anet A6 is a very good machine. Hope you enjoy creating things.
Now i'm working with PETG filament, ABS does not likes me absolutely nothing and I can not tame it.
If you need some help. Tell me how can i help you.
Regards.
Hi Filippo, Based on your experience, I bought the Anet A6 printer. It took me quite a lot longer to assemble (about 9 hours) but probably because I was following the youtube videos and it took more than 2 hours just to remove all the paper!
I haven't used it yet, first tests will be this afternoon
Very nice indeed @Descartex what are the dementions?
Will you be placing it in some acetone to smoothern out the general look before painting it, well only if you used ABS filament?
Very nice indeed @Descartex what are the dementions?
Will you be placing it in some acetone to smoothern out the general look before painting it, well only if you used ABS filament?
Its about 30 cm long and about 18 tall.
I used PLA for it, so I have to smooth it with Cloroform (be careful with it) and paint it with some acrilic colours.
I've painted some works i made and it looks nice!!!
Hi Filippo, Based on your experience, I bought the Anet A6 printer. It took me quite a lot longer to assemble (about 9 hours) but probably because I was following the youtube videos and it took more than 2 hours just to remove all the paper!
I haven't used it yet, first tests will be this afternoon
It was a bit rough because I used low quality while I was experimenting. The next few were rough too. I dont mind that, it saved me material and time while Im still learning.
Thats 25mm diameter to give an idea of scale