Beja Expert Licensed User Longtime User Apr 17, 2016 #1 Hi all Is there a list of supported boards or the arduino mega sold at Radioshack supported? Thanks in advanced.
Hi all Is there a list of supported boards or the arduino mega sold at Radioshack supported? Thanks in advanced.
Erel B4X founder Staff member Licensed User Longtime User Apr 17, 2016 #2 Arduino Mega is supported. Note that Uno is recommended as the first board as it is the most popular one. B4R should work with all Arduino compatible boards. For now it was tested with: - Uno - Due - Mega - Esplora - Leonardo It will work with others as well. Anyone who uses B4R with a different board is welcome to post it here... Upvote 0
Arduino Mega is supported. Note that Uno is recommended as the first board as it is the most popular one. B4R should work with all Arduino compatible boards. For now it was tested with: - Uno - Due - Mega - Esplora - Leonardo It will work with others as well. Anyone who uses B4R with a different board is welcome to post it here...
ellpopeb4a Member Licensed User Longtime User Apr 17, 2016 #3 I use Esplora with RGB LED have no problems however with the 4 button switch can not seem to hook Btn_StateChanged event also because of Esplora there are no pins A0-A7 Upvote 0
I use Esplora with RGB LED have no problems however with the 4 button switch can not seem to hook Btn_StateChanged event also because of Esplora there are no pins A0-A7
Erel B4X founder Staff member Licensed User Longtime User Apr 18, 2016 #4 ellpopeb4a said: however with the 4 button switch can not seem to hook Btn_StateChanged event also because of Esplora there are no pins A0-A7 Click to expand... You need to use the Esplora object. Start a new thread and I'll show you how it can be done. Upvote 0
ellpopeb4a said: however with the 4 button switch can not seem to hook Btn_StateChanged event also because of Esplora there are no pins A0-A7 Click to expand... You need to use the Esplora object. Start a new thread and I'll show you how it can be done.
Jaames Active Member Licensed User Longtime User Apr 18, 2016 #5 I'm using a bunch of different clones, uno and nano mainly (from dx.com, banggod.com) and all boards working good. Upvote 0
I'm using a bunch of different clones, uno and nano mainly (from dx.com, banggod.com) and all boards working good.
D dilettante Active Member Licensed User Longtime User Apr 25, 2016 #6 Anyone tried the ARM-based products (Arduino Zero, MKR1000)? Upvote 0
Erel B4X founder Staff member Licensed User Longtime User Apr 26, 2016 #7 I haven't tried it. It does compile properly so you can test it if you have one of these boards. Upvote 0