B4J Question Test jSerial library

[BogdanU]

Hi,
I tested the program Chat.b4j (Erel's post Nov 21, 2013).
I used a USB/serial (FTDI) converter.
I connected the TxD and RxD lines and ran the Chat.b4j program.
The program seemed to work correctly.

Another USB/serial (FTDI) converter connected to a different USB port received the signal from the first converter with errors.
The logic analyzer waveforms show error bytes.
Error bytes: 0xB1, 0xB2, 0xB4, 0xB7, 0xB8 generated by Chat.b4j

The waveforms from the PC terminal were correct.

The same errors occurred on another computer.
Best regards
Bogdan

 

[JordiCP]

Seems like the PC (Chat.b4j) is transmitting 7 bits + even parity (7E1) , so what the logic analyzer sees is correct (total number of '1's in each byte is even).
The PC terminal is configured as 8N1, so what the logic analyzer sees is also correct.

 

[BogdanU]

Thank you for the explanation.
The default baud rate is 1200.
How do I change it to something else, e.g., 9600?
best regards
Bogdan

 

[teddybear]

Thank you for the explanation.
The default baud rate is 1200.
How do I change it to something else, e.g., 9600?
best regards
Bogdan

You can change it by SetParams method.