May 13, 2014 Replies: 156 B4APhotoPager v3.80 By Giuseppe Salvi B4APhotoPager Author: Giuseppe Salvi Version: 3.8 Properties: FromAssets As String [read only] Returns a references to the file added to the files tab. These file are read-only. FromExtSdCard As String [read only] Returns image is located on the local file system or external SD card. FromHttp As String [read only] Returns image is located in the network. FromHttps As String [read only] Returns the image is located in the network. FromSdCard As String [read only] Returns image is located on the local file system or SD card Fields: Compress_Format_JPG As CompressFormat Compression Format JPG Compress_Format_PNG As CompressFormat Compression Format PNG Fields: Accordion As Int BgToFg As Int CardSlide As Int Default As Int DeptPage As Int FadeInOut As Int FgToBg As Int FlipHorizontal As Int FlipVertical As Int HorizontalCube As Int HorizontalElastic As Int RotateDown As Int RotateUp As Int Rotation As Int RotationSquare As Int ScaleBgToFg As Int Stack As Int Tablet As Int Transition_01 As Int Transition_02 As Int Transition_03 As Int VerticalCube As Int VerticalElastic As Int ZoomIn As Int ZoomOut As Int ZoomOutSlide As Int Fields: Center As ScaleType Center the image in the view, but perform no scaling. Center_Crop As ScaleType Scale the image uniformly (maintain the image's aspect ratio) so that both dimensions (width and height) of the image will be equal to or larger than the corresponding dimension of the view (minus padding). Center_Inside As ScaleType Scale the image uniformly (maintain the image's aspect ratio) so that both dimensions (width and height) of the image will be equal to or less than the corresponding dimension of the view (minus padding). Fit_Center As ScaleType Scale the image using CENTER. Fit_End As ScaleType Scale the image using END. Fit_Start As ScaleType Scale the image using START. Fit_XY As ScaleType Scale the image using FILL. PhotoPager Events: Click LongClick MatrixChanged (Left As Int, Top As Int, Right As Int, Bottom As Int, Width As Int, Height As Int, CenterX As Int, CenterY As Int) PageScrollStateChanged (State As Int) PageScrolled (Position As Int, PositionOffset As Float, PositionOffsetPixels As Int) PageSelected (Position As Int) Ready ScaleChanged (ScaleFactor As Int, FocusX As Int, FocusY As Int) Methods: AddImage (dir As String, file As String) Add an image from sdcard or AssetsDir at the end of the view pager . AddImageAt (index As Int, dir As String, file As String) Add an image from sdcard or AssetsDir to the desired position in the view pager. AddImageFromWeb (address As String) Add an image from web and from Dropbox at the end of the view pager. AddImageFromWebAt (index As Int, address As String) Add an image from web and from Dropbox to the desired position in the view pager. AddView (view As View) Adds a view to the page. view: View AddView2 (view As View, left As Int, top As Int, width As Int, height As Int) Adds a view to the page. view: View left: Left top: Top width: Width height: Height AddViewAt (index As Int, view As View) Adds a view to the specified index. index: Page index view: View AddViewAt2 (index As Int, view As View, left As Int, top As Int, width As Int, height As Int) Adds a view to the specified index. view: View left: Left top: Top width: Width height: Height BringToFront ClearDiskCache Clears disk cache. ClearMemoryCache Clears memory cache. DestroyEngine Stops ImageLoader and clears current configuration. Use this option on exit app. GetArrayList As List Get array from GridView, Gallery, PhotoFlow. GetImageListFromAssets (path As String, sort As Boolean) As List Get entire list of images stored in assets or sub-folder Examples: <code> Dim lv as ListView Dim l as list l.Initialize lv.Initialize("lv") Sub Menu_Click Activity.AddView(lv,0,0,100%x,100%y) l = vp.GetImageListFromAssets("Here the Images folder stored in Assets") or l = vp.GetImageListFromAssets(File.DirAssets) or l = vp.GetImageListFromAssets("") For n = 0 To l.Size-1 lv.AddSingleLine(l.Get(n)) next End Sub </code> GetItem (position As Int) As String Returns Item Example: i.Bitmap=LoadBitmap("",g.GetItem(Position)) GetPageTag (index As Int) As Object Get or Sets the tag associated with this views. A tag can be used to mark a view in its hierarchy and does not have to be unique within the hierarchy. Tags can also be used to store data within a view without resorting to another data structure. index: the index of the page tag: return the Object stored in this view as a tag, or null if not set GoToPage (item As Int, smoothScroll As Boolean) Get or Sets the currently selected page. Initialize (EventName As String, initializeView As Boolean) Initialize the object IsDoubleTapEnabled As Boolean Gets double tap from the page. IsFadeEnabled As Boolean Gets fade from the page. IsInitialized As Boolean IsLockEnabled As Boolean Gets lock from the page. IsPageEnabled (index As Int) As Boolean Returns the enabled status for this view. The interpretation of the enabled state varies by subclass. index: Page index Return type: @return:True if this view is enabled, false otherwise. IsPageVisible (index As Int) As Boolean Returns the enabled status for this view. The interpretation of the enabled state varies by subclass. index: Page index Return type: @return:True if the view in this page is visible, false otherwise. IsZoomEnabled As Boolean Gets zoom from the page. LoadBitmap (Dir As String, FileName As String) As Bitmap Loads and decodes image synchronously. FileName: Image Example: <code> File.FromAssets,"image.png" or "assets://","image.png" File.FromSdCard,"image.png" or "file:///mnt/sdcard/","image.png" File.FromExtSdCard,"image.png" or "file:///mnt/extSdCard/","image.png" File.FromHttp,"image.png",width,height or "http://","site.com/image.png",width,height File.FromHttps,"image.png",width,height or "https://","site.com/image.png",width,heigh </code> Result image Bitmap. Can be <b>null</b> if image loading/decoding was failed or cancelled. LoadBitmap2 (Dir As String, FileName As String, width As Int, height As Int) As Bitmap Loads and decodes image synchronously FileName: Image width: ImageSize height: ImageSize Example: <code> File.FromAssets,"image.png",width,height or "assets://","image.png",width,height File.FromSdCard,"image.png",width,height or "file:///mnt/sdcard/","image.png",width,height File.FromExtSdCard,"image.png",width,height or "file:///mnt/extSdCard/","image.png",width,height File.FromHttp,"image.png",width,height or "http://","site.com/image.png",width,height File.FromHttps,"image.png",width,height or "https://","site.com/image.png",width,heigh </code> targetImageSize: Minimal size for bitmap which will be returned. Downloaded image will be decoded and scaled to bitmap of the size which is <b>equal or larger</b> (usually a bit larger) than incoming targetImageSize. Result image Bitmap. Can be <b>null</b> if image loading/decoding was failed or cancelled. LoadLayout (FileName As String) Loads a layout file(.bal) to PhotoPager as a view. LayoutFile: Load a LayoutFile created with designer LoadLayout2 (index As Int, FileName As String) Loads a layout file(.bal) to PhotoPager to the specified index. index: Page index FileName: Load a LayoutFile created with designer PauseEngine Pause ImageLoader. All new load and display tasks won't be executed until ImageLoader is resumed. Already running tasks are not paused. RemoveAllViews Removes all child views. RemoveViewAt (index As Int) Removes the view that is stored in specified index. index: Page index ResumeEngine Resumes waiting load and display tasks. SetArrayList (array As ArrayList) Set an array passed from, gallery, grid view, cover flow. SetPageBackgroundColor (index As Int, color As Int) Sets Background Color to the page. index: Page index color: Page color SetPageBackgroundImage (index As Int, bitmap As Bitmap) Sets Background bitmap to the page. index: Page index bitmap: Page bitmap SetPageEnabled (index As Int, enabled As Boolean) Set the enabled state of this view. The interpretation of the enabled state varies by subclass. index: Page index enabled: True if this view is enabled, false otherwise. SetPageTag (index As Int, tag As Object) Get or Sets the tag associated with this views. A tag can be used to mark a view in its hierarchy and does not have to be unique within the hierarchy. Tags can also be used to store data within a view without resorting to another data structure. index: the index of the page tag: set the Object stored in this view as a tag SetPageVisible (index As Int, visible As Boolean) Set the enabled state of this view. index: Page index visibility: True if this view is enabled, false otherwise. SetPanelBackgroundColor (index As Int, color As Int) Sets Background Color to the panel. index: Panel index color: Panel color SetPanelBackgroundImage (index As Int, bitmap As Bitmap) Sets Background bitmap to the panel. index: Panel index bitmap: Panel bitmap SetVisibleAnimated (arg0 As Int, arg1 As Boolean) ShowFromAssets (path As String, sort As Boolean) show images from assets or sub-folder not from sdcard. ShowFromBucket (path As String, sort As Boolean) Show from media bucket path: sort: ShowFromMediaStore (sort As Boolean) show images from media store. ShowFromSdCard (dir As String, path As String, sort As Boolean) show images from sdcard not from assets. ShowFromWeb (webStrings() As String, sort As Boolean) show images from web. StopEngine Cancels all running and scheduled display image tasks. <b>NOTE:</b> This method doesn't shutdown if you set them. ImageLoader still can be used after calling this method. SwapView (i As Int, j As Int) Swaps the elements at the specified positions in the specified list. (If the specified positions are equal, invoking this method leaves the list unchanged.) i: the index of one element to be swapped. j: the index of the other element to be swapped. Permissions: android.permission.INTERNET android.permission.MEDIA_CONTENT_CONTROL android.permission.READ_EXTERNAL_STORAGE android.permission.WRITE_EXTERNAL_STORAGE Properties: AdjustViewBounds As Boolean Get or Sets this to true if you want the ImageView to adjust its bounds to preserve the aspect ratio of its drawable. BackGroundColor As Object [write only] Get or Sets the background color for this view. Example: BackGroundColor = Color.Aqua BackGroundColor = "#88666666" or BackGroundColor = Colors.ARGB(100,20,20,20) or Colors.RGB(20,20,20) Background As Drawable BackgroundColorRandomly As Boolean [write only] Set the Background Color Randomly. CacheInMemory As Boolean [write only] Sets whether loaded image will be cached in memory - by default false. CacheOnDisk As Boolean [write only] Sets whether loaded image will be cached on disk - by default false. Color As Colors Returns one of the Color value in the list CompressFormat As PhotoPagerBitmaCompression Get or Sets the known formats a bitmap can be compressed into [ JPG or PNG ] CompressQuality As Int Get or Sets the quality of a bitmap, that can be compressed. [ 0 = low -> 100 = high ] CurrentItem As Void Get or Sets the currently selected page. DoubleTapEnabled As Boolean [write only] Sets double tap to the page. FadeEnabled As Boolean [write only] Sets fade to the page. FadeInTime As Int [write only] Duration of "fade-in" animation (in milliseconds) Whether animation should be played if image is loaded from network Whether animation should be played if image is loaded from disk cache Whether animation should be played if image is loaded from memory cache. File As Files [read only] Return File: File.FromAssets File.FromSdCard File.FromExtSdCard File.FromHttp File.FromHttps Length As Int [read only] Returns length. LockEnabled As Boolean [write only] Sets lock to the page. MaximumScale As Float [write only] Sets the maximum scale MediumScale As Float [write only] Sets the medium scale MinimumScale As Float [write only] Sets the minimum scale OutlineColor As Int [write only] Sets outline color to photo pager. OutlineEnabled As Boolean [write only] Enable or disable outline to photo pager. Parent As Object [read only] ProgressBarVisible As Boolean [write only] Set the enabled state of this view. - by default is true. ScaleType As PhotoPagerScaleType Controls how the image should be resized or moved to match the size of this ImageView. by default is Fit_Center. SetImageForEmptyUri As String [write only] Sets own icon on loading. SetImageOnFail As String [write only] Sets own icon on fail. ShowMessageError As Boolean [write only] Set to true if you want to display an error message. Tag As Object Get or Sets the tag associated with PhotoPager. A tag can be used to mark a view in its hierarchy and does not have to be unique within the hierarchy. Tags can also be used to store data within a view without resorting to another data structure. Top As Int Transition As PagerTransitionEffects Get or Sets transition effect Version As String [read only] Return Author and Version of the library ZoomEnabled As Boolean [write only] Sets zoom to the page. Attachments B4APhotoPager_lib_v2.20.zip B4APhotoPager_lib_v2.20.zip 388.7 KB · Views: 1,240 B4APhotoPager_v3.80.zip B4APhotoPager_v3.80.zip 396 KB · Views: 1,028 B4APhotoPager_v3.85.zip B4APhotoPager_v3.85.zip 399 KB · Views: 1,206 Last edited: Feb 10, 2017 Click to expand...
B4APhotoPager v3.80 By Giuseppe Salvi B4APhotoPager Author: Giuseppe Salvi Version: 3.8 Properties: FromAssets As String [read only] Returns a references to the file added to the files tab. These file are read-only. FromExtSdCard As String [read only] Returns image is located on the local file system or external SD card. FromHttp As String [read only] Returns image is located in the network. FromHttps As String [read only] Returns the image is located in the network. FromSdCard As String [read only] Returns image is located on the local file system or SD card Fields: Compress_Format_JPG As CompressFormat Compression Format JPG Compress_Format_PNG As CompressFormat Compression Format PNG Fields: Accordion As Int BgToFg As Int CardSlide As Int Default As Int DeptPage As Int FadeInOut As Int FgToBg As Int FlipHorizontal As Int FlipVertical As Int HorizontalCube As Int HorizontalElastic As Int RotateDown As Int RotateUp As Int Rotation As Int RotationSquare As Int ScaleBgToFg As Int Stack As Int Tablet As Int Transition_01 As Int Transition_02 As Int Transition_03 As Int VerticalCube As Int VerticalElastic As Int ZoomIn As Int ZoomOut As Int ZoomOutSlide As Int Fields: Center As ScaleType Center the image in the view, but perform no scaling. Center_Crop As ScaleType Scale the image uniformly (maintain the image's aspect ratio) so that both dimensions (width and height) of the image will be equal to or larger than the corresponding dimension of the view (minus padding). Center_Inside As ScaleType Scale the image uniformly (maintain the image's aspect ratio) so that both dimensions (width and height) of the image will be equal to or less than the corresponding dimension of the view (minus padding). Fit_Center As ScaleType Scale the image using CENTER. Fit_End As ScaleType Scale the image using END. Fit_Start As ScaleType Scale the image using START. Fit_XY As ScaleType Scale the image using FILL. PhotoPager Events: Click LongClick MatrixChanged (Left As Int, Top As Int, Right As Int, Bottom As Int, Width As Int, Height As Int, CenterX As Int, CenterY As Int) PageScrollStateChanged (State As Int) PageScrolled (Position As Int, PositionOffset As Float, PositionOffsetPixels As Int) PageSelected (Position As Int) Ready ScaleChanged (ScaleFactor As Int, FocusX As Int, FocusY As Int) Methods: AddImage (dir As String, file As String) Add an image from sdcard or AssetsDir at the end of the view pager . AddImageAt (index As Int, dir As String, file As String) Add an image from sdcard or AssetsDir to the desired position in the view pager. AddImageFromWeb (address As String) Add an image from web and from Dropbox at the end of the view pager. AddImageFromWebAt (index As Int, address As String) Add an image from web and from Dropbox to the desired position in the view pager. AddView (view As View) Adds a view to the page. view: View AddView2 (view As View, left As Int, top As Int, width As Int, height As Int) Adds a view to the page. view: View left: Left top: Top width: Width height: Height AddViewAt (index As Int, view As View) Adds a view to the specified index. index: Page index view: View AddViewAt2 (index As Int, view As View, left As Int, top As Int, width As Int, height As Int) Adds a view to the specified index. view: View left: Left top: Top width: Width height: Height BringToFront ClearDiskCache Clears disk cache. ClearMemoryCache Clears memory cache. DestroyEngine Stops ImageLoader and clears current configuration. Use this option on exit app. GetArrayList As List Get array from GridView, Gallery, PhotoFlow. GetImageListFromAssets (path As String, sort As Boolean) As List Get entire list of images stored in assets or sub-folder Examples: <code> Dim lv as ListView Dim l as list l.Initialize lv.Initialize("lv") Sub Menu_Click Activity.AddView(lv,0,0,100%x,100%y) l = vp.GetImageListFromAssets("Here the Images folder stored in Assets") or l = vp.GetImageListFromAssets(File.DirAssets) or l = vp.GetImageListFromAssets("") For n = 0 To l.Size-1 lv.AddSingleLine(l.Get(n)) next End Sub </code> GetItem (position As Int) As String Returns Item Example: i.Bitmap=LoadBitmap("",g.GetItem(Position)) GetPageTag (index As Int) As Object Get or Sets the tag associated with this views. A tag can be used to mark a view in its hierarchy and does not have to be unique within the hierarchy. Tags can also be used to store data within a view without resorting to another data structure. index: the index of the page tag: return the Object stored in this view as a tag, or null if not set GoToPage (item As Int, smoothScroll As Boolean) Get or Sets the currently selected page. Initialize (EventName As String, initializeView As Boolean) Initialize the object IsDoubleTapEnabled As Boolean Gets double tap from the page. IsFadeEnabled As Boolean Gets fade from the page. IsInitialized As Boolean IsLockEnabled As Boolean Gets lock from the page. IsPageEnabled (index As Int) As Boolean Returns the enabled status for this view. The interpretation of the enabled state varies by subclass. index: Page index Return type: @return:True if this view is enabled, false otherwise. IsPageVisible (index As Int) As Boolean Returns the enabled status for this view. The interpretation of the enabled state varies by subclass. index: Page index Return type: @return:True if the view in this page is visible, false otherwise. IsZoomEnabled As Boolean Gets zoom from the page. LoadBitmap (Dir As String, FileName As String) As Bitmap Loads and decodes image synchronously. FileName: Image Example: <code> File.FromAssets,"image.png" or "assets://","image.png" File.FromSdCard,"image.png" or "file:///mnt/sdcard/","image.png" File.FromExtSdCard,"image.png" or "file:///mnt/extSdCard/","image.png" File.FromHttp,"image.png",width,height or "http://","site.com/image.png",width,height File.FromHttps,"image.png",width,height or "https://","site.com/image.png",width,heigh </code> Result image Bitmap. Can be <b>null</b> if image loading/decoding was failed or cancelled. LoadBitmap2 (Dir As String, FileName As String, width As Int, height As Int) As Bitmap Loads and decodes image synchronously FileName: Image width: ImageSize height: ImageSize Example: <code> File.FromAssets,"image.png",width,height or "assets://","image.png",width,height File.FromSdCard,"image.png",width,height or "file:///mnt/sdcard/","image.png",width,height File.FromExtSdCard,"image.png",width,height or "file:///mnt/extSdCard/","image.png",width,height File.FromHttp,"image.png",width,height or "http://","site.com/image.png",width,height File.FromHttps,"image.png",width,height or "https://","site.com/image.png",width,heigh </code> targetImageSize: Minimal size for bitmap which will be returned. Downloaded image will be decoded and scaled to bitmap of the size which is <b>equal or larger</b> (usually a bit larger) than incoming targetImageSize. Result image Bitmap. Can be <b>null</b> if image loading/decoding was failed or cancelled. LoadLayout (FileName As String) Loads a layout file(.bal) to PhotoPager as a view. LayoutFile: Load a LayoutFile created with designer LoadLayout2 (index As Int, FileName As String) Loads a layout file(.bal) to PhotoPager to the specified index. index: Page index FileName: Load a LayoutFile created with designer PauseEngine Pause ImageLoader. All new load and display tasks won't be executed until ImageLoader is resumed. Already running tasks are not paused. RemoveAllViews Removes all child views. RemoveViewAt (index As Int) Removes the view that is stored in specified index. index: Page index ResumeEngine Resumes waiting load and display tasks. SetArrayList (array As ArrayList) Set an array passed from, gallery, grid view, cover flow. SetPageBackgroundColor (index As Int, color As Int) Sets Background Color to the page. index: Page index color: Page color SetPageBackgroundImage (index As Int, bitmap As Bitmap) Sets Background bitmap to the page. index: Page index bitmap: Page bitmap SetPageEnabled (index As Int, enabled As Boolean) Set the enabled state of this view. The interpretation of the enabled state varies by subclass. index: Page index enabled: True if this view is enabled, false otherwise. SetPageTag (index As Int, tag As Object) Get or Sets the tag associated with this views. A tag can be used to mark a view in its hierarchy and does not have to be unique within the hierarchy. Tags can also be used to store data within a view without resorting to another data structure. index: the index of the page tag: set the Object stored in this view as a tag SetPageVisible (index As Int, visible As Boolean) Set the enabled state of this view. index: Page index visibility: True if this view is enabled, false otherwise. SetPanelBackgroundColor (index As Int, color As Int) Sets Background Color to the panel. index: Panel index color: Panel color SetPanelBackgroundImage (index As Int, bitmap As Bitmap) Sets Background bitmap to the panel. index: Panel index bitmap: Panel bitmap SetVisibleAnimated (arg0 As Int, arg1 As Boolean) ShowFromAssets (path As String, sort As Boolean) show images from assets or sub-folder not from sdcard. ShowFromBucket (path As String, sort As Boolean) Show from media bucket path: sort: ShowFromMediaStore (sort As Boolean) show images from media store. ShowFromSdCard (dir As String, path As String, sort As Boolean) show images from sdcard not from assets. ShowFromWeb (webStrings() As String, sort As Boolean) show images from web. StopEngine Cancels all running and scheduled display image tasks. <b>NOTE:</b> This method doesn't shutdown if you set them. ImageLoader still can be used after calling this method. SwapView (i As Int, j As Int) Swaps the elements at the specified positions in the specified list. (If the specified positions are equal, invoking this method leaves the list unchanged.) i: the index of one element to be swapped. j: the index of the other element to be swapped. Permissions: android.permission.INTERNET android.permission.MEDIA_CONTENT_CONTROL android.permission.READ_EXTERNAL_STORAGE android.permission.WRITE_EXTERNAL_STORAGE Properties: AdjustViewBounds As Boolean Get or Sets this to true if you want the ImageView to adjust its bounds to preserve the aspect ratio of its drawable. BackGroundColor As Object [write only] Get or Sets the background color for this view. Example: BackGroundColor = Color.Aqua BackGroundColor = "#88666666" or BackGroundColor = Colors.ARGB(100,20,20,20) or Colors.RGB(20,20,20) Background As Drawable BackgroundColorRandomly As Boolean [write only] Set the Background Color Randomly. CacheInMemory As Boolean [write only] Sets whether loaded image will be cached in memory - by default false. CacheOnDisk As Boolean [write only] Sets whether loaded image will be cached on disk - by default false. Color As Colors Returns one of the Color value in the list CompressFormat As PhotoPagerBitmaCompression Get or Sets the known formats a bitmap can be compressed into [ JPG or PNG ] CompressQuality As Int Get or Sets the quality of a bitmap, that can be compressed. [ 0 = low -> 100 = high ] CurrentItem As Void Get or Sets the currently selected page. DoubleTapEnabled As Boolean [write only] Sets double tap to the page. FadeEnabled As Boolean [write only] Sets fade to the page. FadeInTime As Int [write only] Duration of "fade-in" animation (in milliseconds) Whether animation should be played if image is loaded from network Whether animation should be played if image is loaded from disk cache Whether animation should be played if image is loaded from memory cache. File As Files [read only] Return File: File.FromAssets File.FromSdCard File.FromExtSdCard File.FromHttp File.FromHttps Length As Int [read only] Returns length. LockEnabled As Boolean [write only] Sets lock to the page. MaximumScale As Float [write only] Sets the maximum scale MediumScale As Float [write only] Sets the medium scale MinimumScale As Float [write only] Sets the minimum scale OutlineColor As Int [write only] Sets outline color to photo pager. OutlineEnabled As Boolean [write only] Enable or disable outline to photo pager. Parent As Object [read only] ProgressBarVisible As Boolean [write only] Set the enabled state of this view. - by default is true. ScaleType As PhotoPagerScaleType Controls how the image should be resized or moved to match the size of this ImageView. by default is Fit_Center. SetImageForEmptyUri As String [write only] Sets own icon on loading. SetImageOnFail As String [write only] Sets own icon on fail. ShowMessageError As Boolean [write only] Set to true if you want to display an error message. Tag As Object Get or Sets the tag associated with PhotoPager. A tag can be used to mark a view in its hierarchy and does not have to be unique within the hierarchy. Tags can also be used to store data within a view without resorting to another data structure. Top As Int Transition As PagerTransitionEffects Get or Sets transition effect Version As String [read only] Return Author and Version of the library ZoomEnabled As Boolean [write only] Sets zoom to the page.
lonleystar Well-Known Member Licensed User Longtime User Oct 26, 2014 #61 bluedude said: I have done togglezoom but this does not influence the click event, it is always disabled. Click to expand... Hi, did U tried it via menu? anyway I'll fix it.
bluedude said: I have done togglezoom but this does not influence the click event, it is always disabled. Click to expand... Hi, did U tried it via menu? anyway I'll fix it.
B bluedude Well-Known Member Licensed User Longtime User Oct 26, 2014 #62 Menu? I just added togglezoom after initializing the slider. I don't need and want a menu to do it.
lonleystar Well-Known Member Licensed User Longtime User Oct 27, 2014 #63 bluedude said: Menu? I just added togglezoom after initializing the slider. I don't need and want a menu to do it. Click to expand... Hi, It is fixed so u can call vp.ToggleZoom in Activity_Create
bluedude said: Menu? I just added togglezoom after initializing the slider. I don't need and want a menu to do it. Click to expand... Hi, It is fixed so u can call vp.ToggleZoom in Activity_Create
S susu Well-Known Member Licensed User Longtime User Oct 27, 2014 #64 Please fix the blur image issue. Thanks!
B bluedude Well-Known Member Licensed User Longtime User Oct 27, 2014 #65 Great, click works! One other small thing. I have two sliders and I use one to download images in cache. The second one (bigger sizes) needs to get images from the cache which are downloaded by slider1 already. How is the cache arranged? Where are the images stored? Also notices it isn't easy to get the URL of a current image item.
Great, click works! One other small thing. I have two sliders and I use one to download images in cache. The second one (bigger sizes) needs to get images from the cache which are downloaded by slider1 already. How is the cache arranged? Where are the images stored? Also notices it isn't easy to get the URL of a current image item.
lonleystar Well-Known Member Licensed User Longtime User Oct 27, 2014 #66 bluedude said: Great, click works! One other small thing. I have two sliders and I use one to download images in cache. The second one (bigger sizes) needs to get images from the cache which are downloaded by slider1 already. How is the cache arranged? Where are the images stored? Also notices it isn't easy to get the URL of a current image item. Click to expand... Hi, U've to set CacheOnDisk = true.
bluedude said: Great, click works! One other small thing. I have two sliders and I use one to download images in cache. The second one (bigger sizes) needs to get images from the cache which are downloaded by slider1 already. How is the cache arranged? Where are the images stored? Also notices it isn't easy to get the URL of a current image item. Click to expand... Hi, U've to set CacheOnDisk = true.
lonleystar Well-Known Member Licensed User Longtime User Oct 27, 2014 #67 susu said: Please fix the blur image issue. Thanks! Click to expand... Hi Susu, I'm thinking to U, but I dont see any blur to my demo please post some shoot.
susu said: Please fix the blur image issue. Thanks! Click to expand... Hi Susu, I'm thinking to U, but I dont see any blur to my demo please post some shoot.
M Mrjoey Active Member Licensed User Longtime User Oct 27, 2014 #68 Mrjoey said: hey , mr Lonleystar , is it possible to add "ItemWidth" and "ItemHeight"? Vp.SetArrayList() is not working , although the previous version is working .thank u Click to expand... mr lonleystar , welcome back , anything to say about this? thank u
Mrjoey said: hey , mr Lonleystar , is it possible to add "ItemWidth" and "ItemHeight"? Vp.SetArrayList() is not working , although the previous version is working .thank u Click to expand... mr lonleystar , welcome back , anything to say about this? thank u
lonleystar Well-Known Member Licensed User Longtime User Oct 27, 2014 #69 Mrjoey said: mr lonleystar , welcome back , anything to say about this? thank u Click to expand... Hi, SetArrayList work whit B4GridView. With B4Gallery and B4CoverFlow not yet.
Mrjoey said: mr lonleystar , welcome back , anything to say about this? thank u Click to expand... Hi, SetArrayList work whit B4GridView. With B4Gallery and B4CoverFlow not yet.
B bluedude Well-Known Member Licensed User Longtime User Oct 27, 2014 #70 Hi, I use that but my scenario it slightly different. Anyway, solved it differently. I would also advise to kill the ToggleZoom stuff or allow and override the boolean, now I need to keep track of the Toggle status which is a small pain. I rather have a boolean parameter added to enforce it on or off.
Hi, I use that but my scenario it slightly different. Anyway, solved it differently. I would also advise to kill the ToggleZoom stuff or allow and override the boolean, now I need to keep track of the Toggle status which is a small pain. I rather have a boolean parameter added to enforce it on or off.
S susu Well-Known Member Licensed User Longtime User Oct 27, 2014 #71 Hi Salvi, Please test the sample app, you can see all the image will be blur when zoom in, even it's high-res image. You can take a look at the sample code too, I did what you said but can't fix it. Thank you. Attachments blurimage.zip blurimage.zip 40.7 KB · Views: 574 ViewPager.apk ViewPager.apk 357.6 KB · Views: 593
Hi Salvi, Please test the sample app, you can see all the image will be blur when zoom in, even it's high-res image. You can take a look at the sample code too, I did what you said but can't fix it. Thank you.
lonleystar Well-Known Member Licensed User Longtime User Oct 29, 2014 #72 susu said: Hi Salvi, Please test the sample app, you can see all the image will be blur when zoom in, even it's high-res image. You can take a look at the sample code too, I did what you said but can't fix it. Thank you. Click to expand... Hi, I tested the demo U post and I dont see any blur on my S4. You have to consider that the zoom ranges = 1 to 3 MIN_SCALE = 1.0 MID_SCALE = 1.75 MAX_SCALE = 3.0
susu said: Hi Salvi, Please test the sample app, you can see all the image will be blur when zoom in, even it's high-res image. You can take a look at the sample code too, I did what you said but can't fix it. Thank you. Click to expand... Hi, I tested the demo U post and I dont see any blur on my S4. You have to consider that the zoom ranges = 1 to 3 MIN_SCALE = 1.0 MID_SCALE = 1.75 MAX_SCALE = 3.0
S susu Well-Known Member Licensed User Longtime User Oct 29, 2014 #73 lonleystar said: Hi, I tested the demo U post and I dont see any blur on my S4. You have to consider that the zoom ranges = 1 to 3 MIN_SCALE = 1.0 MID_SCALE = 1.75 MAX_SCALE = 3.0 Click to expand... How can I set zoom range? There's no method to do it.
lonleystar said: Hi, I tested the demo U post and I dont see any blur on my S4. You have to consider that the zoom ranges = 1 to 3 MIN_SCALE = 1.0 MID_SCALE = 1.75 MAX_SCALE = 3.0 Click to expand... How can I set zoom range? There's no method to do it.
lonleystar Well-Known Member Licensed User Longtime User Oct 30, 2014 #74 susu said: How can I set zoom range? There's no method to do it. Click to expand... Hi, I'll implement it till tomorrow.
susu said: How can I set zoom range? There's no method to do it. Click to expand... Hi, I'll implement it till tomorrow.
lonleystar Well-Known Member Licensed User Longtime User Oct 31, 2014 #75 Hi all, B4APhotoPager is updated to v1.65. Added: MinimumScale MediumScale MaximumScale Code: Sub Activity_Create(FirstTime As Boolean) vp.MinimumScale = 1 vp.MediumScale = 1.5 --> If U dont want that zoom also medium set it to 0 vp.MaximumScale = 2 End Sub
Hi all, B4APhotoPager is updated to v1.65. Added: MinimumScale MediumScale MaximumScale Code: Sub Activity_Create(FirstTime As Boolean) vp.MinimumScale = 1 vp.MediumScale = 1.5 --> If U dont want that zoom also medium set it to 0 vp.MaximumScale = 2 End Sub
S susu Well-Known Member Licensed User Longtime User Nov 1, 2014 #76 Thanks for update but there's new strange problem: - Open app 1st time can not zoom/double tap. - Open app 2nd time can zoom/double tap. - Open app 3rd time can not zoom/double tap. - Open app 4th time can zoom/double tap.
Thanks for update but there's new strange problem: - Open app 1st time can not zoom/double tap. - Open app 2nd time can zoom/double tap. - Open app 3rd time can not zoom/double tap. - Open app 4th time can zoom/double tap.
lonleystar Well-Known Member Licensed User Longtime User Nov 1, 2014 #77 susu said: Thanks for update but there's new strange problem: - Open app 1st time can not zoom/double tap. - Open app 2nd time can zoom/double tap. - Open app 3rd time can not zoom/double tap. - Open app 4th time can zoom/double tap. Click to expand... Hi, U've not to use vp.ToggleDoubleTap and vp.ToggleZoom together. Another thing CacheInMemory and CacheOnDisk they are already by default false. P.S. If U use ToggleZoom U can not zoom and can not tap. If U use ToggleDoubleTap U can zoom by fingers but can not tap
susu said: Thanks for update but there's new strange problem: - Open app 1st time can not zoom/double tap. - Open app 2nd time can zoom/double tap. - Open app 3rd time can not zoom/double tap. - Open app 4th time can zoom/double tap. Click to expand... Hi, U've not to use vp.ToggleDoubleTap and vp.ToggleZoom together. Another thing CacheInMemory and CacheOnDisk they are already by default false. P.S. If U use ToggleZoom U can not zoom and can not tap. If U use ToggleDoubleTap U can zoom by fingers but can not tap
S susu Well-Known Member Licensed User Longtime User Nov 1, 2014 #78 Ok, I figured out. Honestly, your naming method is really confused I will donate you as I said before. Thank you so much.
Ok, I figured out. Honestly, your naming method is really confused I will donate you as I said before. Thank you so much.
lonleystar Well-Known Member Licensed User Longtime User Nov 1, 2014 #79 susu said: Ok, I figured out. Honestly, your naming method is really confused I will donate you as I said before. Thank you so much. Click to expand... Hi Susu, I've to thank U for the donation. P.S. Please can U explain me with some example what is confused? so I can make it more better.
susu said: Ok, I figured out. Honestly, your naming method is really confused I will donate you as I said before. Thank you so much. Click to expand... Hi Susu, I've to thank U for the donation. P.S. Please can U explain me with some example what is confused? so I can make it more better.
S susu Well-Known Member Licensed User Longtime User Nov 1, 2014 #80 lonleystar said: Please can U explain me with some example what is confused? so I can make it more better. Click to expand... For example why I can not zoom when set ToogleZoom? Is it easier to understand if you name it like SetZooom = True/False ?
lonleystar said: Please can U explain me with some example what is confused? so I can make it more better. Click to expand... For example why I can not zoom when set ToogleZoom? Is it easier to understand if you name it like SetZooom = True/False ?
