Android Question Button not clickable

[clooney48]

Strange problem! I have a layout with two rows of buttons at the bottom. The last row (4 buttons) works without problems but the large button "btnLatLon" with the label "Label5" on top works only after tapping x times on the screen, especially at the bottom of the button there is a chance, so that I hit the buttons below also. I hope this was understandable. Enclosed the layout and the layout definitions. Of course the button btnLatLon is defined and there is a "Sub btnLatLon_Click" in the code. (The buttons are imageviews with a label on top). When i remove all the layout code the two rows of buttons are in the middle and not button works.

'All variants script
'AutoScaleAll 'uncomment to scale all views based on the device physical size.
AutoScaleRate(0.5)

LVDb.Width = 100%x
LVDb.SetTopAndBottom(lblBalken.Bottom, btnLatLon.Top - 10dip)

lblBalken.Width = 100%x
lblPOI.Left = 5%x
lblDist.Right = 95%x

btnByNumber.Width = 23%x
btnByNumber.Left = 0%x
btnByNumber.Bottom = 99%y
Label1.Bottom = 99%y

btnByName.Width = 23%x
btnByName.Left = btnByNumber.Right + 10dip
btnByName.Bottom = 99%y
Label2.Left = btnByNumber.Right + 10dip
Label2.Bottom = 99%y

btnByMls.Width = 23%x
btnByMls.Left = btnByName.Right + 10dip
btnByMls.Bottom = 99%y
Label3.Left = btnByName.Right + 10dip
Label3.Bottom = 99%y

btnSearch.Width = 23%x
btnSearch.Left = btnByMls.Right + 10dip
btnSearch.Bottom = 99%y
Label4.Left = btnByMls.Right + 10dip
Label4.Bottom = 99%y

btnLatLon.Left = 0%x
btnLatLon.Width = 100%x
btnLatLon.Bottom = btnByName.Top - 10dip
Label5.Left = 0%x
Label5.Width = 100%x
Label5.Bottom = btnByName.Top - 10dip

 

[NJDude]

You should include your project to better understand what's going on.

By looking at your screenshot, it seems the label might be blocking the imageview, but that's just a guess.

 

[eps]

Personally I would generate this with debug and trace through the code to see exactly what's going on.

 

[clooney48]

You should include you project to better understand what's going on.

By looking at your screenshot, it seems the label might be blocking the imageview, but that's just a guess.

I supposed this too although the 4 buttons below worked nevertheless there were also labels on it. But I tested this inserting a new sub procedure "Sub Label5_Click". This worked neither.

 

[Erel]

Can you upload your project (File - Export as zip)?

 

[clooney48]

You were right! I had in the code additionally to the designer code this line: "Activity.AddView(LVDb, 0, 150, 95%x, 80%y)". This caused that the button was covered for 90%. Thanks!

 

[NJDude]

You should use DIP:

Good:

Activity.AddView(LVDb, 0dip, 150dip, 95%x, 80%y)

Bad:

Activity.AddView(LVDb, 0, 150, 95%x, 80%y)

Not using dip will make your layouts not to scale properly on all devices.

 

[clooney48]

Thanks! ;-)