Android Question Problem Designer Script

[maurizio barbera]

Hi, I created a script to adapt the view of the screen. in all ok visual designer, but when I start debugging on the display you see the view out of the screen ... for instance. (I know that the designer does not enter the lower part but my problem is the right side)

the code is:

lblIP.Top = 5dip
lblIP.Left = 5dip
lblPort.Top = lblIP.Top + lblIP.Height + 5dip
lblPort.Left = lblIP.Left
lblUtente.Top = lblPort.Top + lblPort.Height + 5dip
lblUtente.Left = lblIP.Left
lblPassword.Top = lblUtente.Top + lblUtente.Height + 5dip
lblPassword.Left = lblIP.Left
lblDBdaUsare.Top = lblPassword.Top + lblPassword.Height + 5dip
lblDBdaUsare.Left = lblIP.Left
lblDatabase.Top = lblDBdaUsare.Top + lblDBdaUsare.Height + 5dip
lblDatabase.Left = lblIP.Left
cmdSalva.Top = lblDatabase.Top + lblDatabase.Height + 5dip + 5dip
cmdSalva.Left = lblIP.Left
cmdTestIP.Top = 5dip
cmdTestIP.Left = 100%x - cmdTestIP.Width - 5dip
cmdTestIP.Height = txtPassword.Top + txtPassword.Height + 5dip
cmdLeggiDB.Top = lblDatabase.Top
cmdLeggiDB.Left = cmdTestIP.Left
cmdLeggiDB.Height = lstDatabase.Height
cmdEsci.Top = cmdSalva.Top
cmdEsci.Left = 100%x - cmdEsci.Width - 5dip
txtIP.Top = lblIP.Top
txtIP.Left = lblIP.Left + lblIP.Width + 5dip
txtIP.Width = cmdTestIP.Left - lblIP.Left - lblIP.Width - 10dip
txtPort.Top = lblPort.Top
txtPort.Left = txtIP.Left
txtPort.Width = txtIP.Width
txtUtente.Top = lblUtente.Top
txtUtente.Left = txtIP.Left
txtUtente.Width = txtIP.Width
txtPassword.Top = lblPassword.Top
txtPassword.Left = txtIP.Left
txtPassword.Width = txtIP.Width
lblNomeDatabase.Top = lblDBdaUsare.Top
lblNomeDatabase.Left = txtIP.Left
lblNomeDatabase.Width = txtIP.Width
lstDatabase.Top = lblDatabase.Top
lstDatabase.Left = txtIP.Left
lstDatabase.Width = txtIP.Width

 

[Erel]

@luca There are two AutoScaleAll calls in your project as well. You have also didn't set the anchors of the views in the middle (which should be set to BOTH).

Please let me help @maurizio barbera. Any other designer related questions or issues should be posted in a different thread.

 

[Erel]

Here is the correct implementation.

 

[LucaMs]

There are two AutoScaleAll calls in your project as well. You have also didn't set the anchors of the views in the middle (which should be set to BOTH).

Half right.
I had not seen the two AutoScaleAll because I thought that they were in a single script. In "my project" central Views are anchored horizontally with BOTH.

 

[maurizio barbera]

But not in mine (#13)

Also, I think there is a bug in the Designer (B4A 5.50):
Please, compare the project attached in #16 with the one attached here (B4A 4.30)

ok ... the project works on both devices without going off the screen

 

[LucaMs]

Also, I think there is a bug in the Designer (B4A 5.50):
Please, compare the project attached in #16 with the one attached here (B4A 4.30)

There are NO bugs in the Designer 5.50... again two AutoScaleAll.

 

[Erel]

There is NO bugs in the Designer 5.50

I know

 

[LucaMs]

Please let me help @maurizio barbera.

This is wat I tried to do. But I can spend my time in a better way, next time.

 

[maurizio barbera]

Here is the correct implementation.

This also works ... ultimately I made that will perform a double autoscallall

thanks for your help