E emrah New Member Licensed User Longtime User Oct 1, 2013 #1 http://dl.linux-sunxi.org/A10/A10 Datasheet - v1.00 (2011-08-22).pdf Refer to page 60. needles for the serial port is running android arm. I want to access the registers directly related to. and I want to solder pins, How basic4android access to registers using?
http://dl.linux-sunxi.org/A10/A10 Datasheet - v1.00 (2011-08-22).pdf Refer to page 60. needles for the serial port is running android arm. I want to access the registers directly related to. and I want to solder pins, How basic4android access to registers using?
Erel B4X founder Staff member Licensed User Longtime User Oct 1, 2013 #2 Is this board running Android? Or are you connecting to it with UsbSerial library? Upvote 0
E emrah New Member Licensed User Longtime User Oct 1, 2013 #3 yes arm8 running android. (Android v.4.0). I do not want to use the usb drive. Tablet pc yi pulled it out. for direct use in the RX and TX pins of arm8. rx and tx I want to read or write information into the registers. uart hardware takes care of the rest. additional equipment for pcb running android can do so. My goal is to achieve additional hardware addresses. Arm8 an microcontrollers, do u have a serial port (pdf datasheth), and you will surely have an address registers and registers. Upvote 0
yes arm8 running android. (Android v.4.0). I do not want to use the usb drive. Tablet pc yi pulled it out. for direct use in the RX and TX pins of arm8. rx and tx I want to read or write information into the registers. uart hardware takes care of the rest. additional equipment for pcb running android can do so. My goal is to achieve additional hardware addresses. Arm8 an microcontrollers, do u have a serial port (pdf datasheth), and you will surely have an address registers and registers.
T Toley Active Member Licensed User Longtime User Oct 1, 2013 #4 Maybe it can be done in Linux, but I don't think it can be done directly with Android. But I'm very curious to read experts answers. Upvote 0
Maybe it can be done in Linux, but I don't think it can be done directly with Android. But I'm very curious to read experts answers.
E emrah New Member Licensed User Longtime User Oct 1, 2013 #5 I made a connection to the tablet in the arm. rx, tx and gnd. the other end of the 18f4620 rx, tx, gnd connection made. now only need to send an 8-bit number. basic4 uart library for android is required. need to do this. Attachments PICT0022.JPG 313 KB · Views: 412 Upvote 0
I made a connection to the tablet in the arm. rx, tx and gnd. the other end of the 18f4620 rx, tx, gnd connection made. now only need to send an 8-bit number. basic4 uart library for android is required. need to do this.
E emrah New Member Licensed User Longtime User Oct 1, 2013 #6 by the same method. To arm in the tablets can do many of the connection. EXAMPLE. SPI, such as IR. page 60, see . Upvote 0
by the same method. To arm in the tablets can do many of the connection. EXAMPLE. SPI, such as IR. page 60, see .
Erel B4X founder Staff member Licensed User Longtime User Oct 1, 2013 #7 There isn't any standard way in Android to access a register. Upvote 0
