The goal of this Make Project THime is a LEGO ® module to display in a 4-Bit LED display, the time or temperature & humidity. Control of the display via Infrared. Powered by an Arduino UNO. See here for details. Download B4R source. Additional...
Hi guys, @Erel asked for a picture of my display after having so promptly created a Library for my TFT 1.8" ST7735R display. So after a few successful tests, I decided to create something worthy of EREL's eyes. So here I give you a small video...
Porting B4R as such is possible too.. Another video on CGTN Africa for the previous post https://www.b4x.com/android/forum/threads/b4r-for-waziup-wastebin-management-system-africas-big-iot-platform.84462/
I have uploaded a tool I called the Serial Connector Graph. It allows you to send data points from the Arduino that will be plotted on a bar graph or you can also send log text messages that will be shown in a text area. I find it is sometimes...
Hi guys... Here's another example of RGB "smart LED" manipulation... And the code that goes with it... #Region Project Attributes #AutoFlushLogs: True #CheckArrayBounds: True #StackBufferSize: 300 #End Region Sub Process_Globals...
A very simply project using B4R IR send and receive Library. The blue one is the first test unit using UNO + LCD + IR Send + IR Receiver + 2 Push Buttons, I got some issue when using the push buttons and IR Receiver together, when received a...
Hi everybody, Thanks to B4R I was able to develop a Data Logger and remote console for my main project, a food metal detector. This pjt show whatever is on MD main display and simulate it's four buttons remotelly. It stores on local SD some log...
Hi guys, time ago i built a Rover (4 wheel, Arduino powered) for my B4A android app: https://play.google.com/store/apps/details?id=com.rfo.IRaceradvanced the full tutorial for the Rover is here...
The goal of this Make Project parkSTOP is to build a parkSTOP device (Arduino UNO, B4R) to visually indicate via LED & Sound, if parking position reached. In addition, indicate via Android App (B4A) , connected via Bluetooth, the actual distance...
This is based on EREL Project ESP Configurator... https://www.b4x.com/android/forum/threads/esp-configurator-based-on-b4rserializator.81452/ Just I port the whole code into An App...You can download the Apk file from here or Download from...
Arduino Uno or Nano generates 244-8,000,000 Hz by dividing the 16 MHz crystal oscillator. The pushbuttons set the division from 255 Hz to 8 MHz, holding the button advance the frequency every second.. The high frequency output at pin 9 is 8000000...
Althought not finished yet, I've this project at 75% (hope) finished (objectives were learn linux, NodeMCU, use devices on my own and have a safety home) The core system is a Rpi3, which: - Have a cheap USB camera attached (PS2 eyetoy camera) -...
this example of MQTT client on ESP8266 is built to make a gateway between a rfbridge sonoff with tasmota and mobiles with a MQTT client, to monitor 2 SOS buttons MQTT broker is cloudMQTT.com Global configuration - a start we have 2 SOS...
Hi all, I'm trying to learn how to create B4R libraries and convert libraries that I wrote with Arduino IDE for Arduino and ESP8266. I have to convert six libraries already working on Arduino IDE and all with sample code, and one library is...
OLED low frequency oscilloscope, bandwidth is DC to 1000Hz. Max sampling rate is 16000 samples per second. An oscilloscope with these specifications has limited use, but it is a good exercise in using OLED display. rWire lib is used for I2C...
The common way for IoT is to set the ESP8266 to server mode and connect to it from the WWW by entering your router static IP address in a browser. My internet provider don't have the option for static IP address. In this project the ESP...
How to create a robot for Telegram using Arduino ESP8266 / ESP8285
I've attached an FFT test program with source code for B4R. I am using B4R 2.51. My MCU is an 80MHz Wemos board. The FFT is fast. It uses a pre-computed coefficient lookup table. It performs a double precision complex FFT. The FFT code is in...
The goal of this Make Project numberX is to build a LEGO ® module to generate and display a random number within a given range. Powered by an Arduino UNO. Usage example for playing games requiring random number (instead of dices). Bit of...
ESP Updater This program is for uploading the prepared and compiled files on ESP8266 series modules and matching boards such as NodeMCU, Wemos, etc. Some features: Support bin file Detect the serial port of the device Support for Auto...